Stainless or Powder Coated Wheels Liners?

[hdmtnrider]

SS vote here. But note to op, the picture with the black wheel should have showed both front and rear wheel's. IMO one wheel does lead your mind to the spare wheel look. (Again IMOA).
HAPPY RVING!

[PenJoe]

As long as we are on the subject of aesthetics of the RV, I would like to bring up a question on the graphics. The passenger side graphics flows from front to rear. However, the driver's side is broken up by a squared off, dark, wide picture frame effect with a notch in the lower rear corner. That seems to defeat the purpose of the flow graphics. It looks more like a city bus billboard waiting for an advertiser. Anyone else agree/disagree on this?

[Kaadk]

Zoomed in, you can tell that's a custom black wheel, but at the distance that picture was shot it looks like an ordinary black steel rim. Same as you'd find on any vehicle missing it's hubcaps.

I don't mind the black, if 'ordinary black steel rim' is the look you're going for. After all, it's a MH. I don't really expect to see custom wheels. But if you're trying to achieve a custom look (like the rims on the jeep) it completely misses the mark.


Sent from my iPhone using Forest River Forums

[Total Loss]

This is an Isata. (upper end of the MBS scale).
How about some Alcoas?
Or other silver and black alloys?

[bclemens]

Originally Posted by Total Loss

This is an Isata. (upper end of the MBS scale).
How about some Alcoas?
Or other silver and black alloys?

See post #5.

[Total Loss]

Originally Posted by bclemens

See post #5.

Sorry.
Does anyone else source a heavy duty alloy wheel for the MBS?

[bclemens]

Trying that, but no one really does. Not in the qty that we need on a regular basis. We used to get them for an E450, but even then the supply would always dry up or the quality was not what we needed. I'll find something sooner or later.