#2 Ask the Sabre & Silhouette Factory Rep. Read Post 1 first.

[MillerTime]

Sorry keep forgetting to add the pics before sending. Heres the recliner/couch that was in the Crusader 360bhs.

[SabreSam]

Originally Posted by MillerTime

Mr. Sabre Sam, I was wondering what the bunk/ couch options are for sure in the 36qbok for trailers getting built in the next few months? I have seen the air bed couches, the just plain bunk instead of a couch, and the sleep and play like we had in our 2013 Puma 295kbh.
-I saw a recliner-couch in a Crusader 360bhs that would fold flat like a futon but each side could recline individually as well. Enclosed is a pic of this couch-recliner, I would love to have one in my trailer when we order it shortly. Is this possible and or what are the official options for this area on the 36qbok?
Thanks so much for your time!
Luke

I sent you a PM. We should discuss your options.

[Lottda]

Hi Sam,just purchased a 2012 sabre 5th wheel...rv heater stopped working. Just filled second lp tank...stove works fine,water heart on the gas switch is working ...heater worked fine up until now...any ideas. Thanks Dan

[SabreSam]

Originally Posted by Lottda

Hi Sam,just purchased a 2012 sabre 5th wheel...rv heater stopped working. Just filled second lp tank...stove works fine,water heart on the gas switch is working ...heater worked fine up until now...any ideas. Thanks Dan

Did you purchase new or used?

[Lottda]

Bought new last April....I had a previous problem with a leak. I donot tow this rv it stays in nh...bought it in nc. Called the factory rep on a previous issue he said I would have to find a forrest river certified tech to come out..and look at it.i finally fixed it myself...very difficult to find someone certified to come out and look at it. It's still under warrenty.

[SabreSam]

Originally Posted by Lottda

Bought new last April....I had a previous problem with a leak. I donot tow this rv it stays in nh...bought it in nc. Called the factory rep on a previous issue he said I would have to find a forrest river certified tech to come out..and look at it.i finally fixed it myself...very difficult to find someone certified to come out and look at it. It's still under warrenty.

Lottda,
I am not sure I can trouble shoot from here. If it stopped suddenly, did you double check the thermostat.

Sometimes opening a new lp bottle to fast can lock up the bottle valve, but you have other gas appliances working. So gas supply has to be good.

I think your best bet is to take the unit to a local dealer.

Sorry I can't be more help.

Sabresam

[wowzer]

Good morning Sam
Noticed a situation with my dinette slide out and looking for some help. This is on a 2013 Sabre 34REQS-6. As you can tell by the pic the plastic support for the slide out is cracked on the end. Just to the point of where the screw is. I have watched as the slid goes in and out and at this point it seems secure. I'm concerned about the future of this situation though. I guess I'm just looking for some guidance from you as to what I need to do. Fix it of course. LOL

[ependydad]

^^^ There's been a weird batch of these lately. I'm definitely going to watch mine closely!

[Cajun Po-Boy]

Both of mine on the two main slides are coming loose...spoke to my Dealer, it's been an issue lately but an easy fix for the Dealer...per SabreSam on previous post about this...recommended to see your Dealer sooner than later for them to repair correctly.

[okietom]

Sam,
I have a 2012 Sabre 34RLQS and I am wanting to mount the TV in the bedroom on the wall over the window above the dresser. I have spoken to dealer and they don't know if there is support for it or not. How can I tell if there is enough support in the wall and if so the correct procedure for mounting bracket.
Build date - 9/7/2011
VIN - 4X4FSRK21C3005650

[TURBS]

Originally Posted by okietom

Sam,
I have a 2012 Sabre 34RLQS and I am wanting to mount the TV in the bedroom on the wall over the window above the dresser. I have spoken to dealer and they don't know if there is support for it or not. How can I tell if there is enough support in the wall and if so the correct procedure for mounting bracket.
Build date - 9/7/2011
VIN - 4X4FSRK21C3005650

If there's no sticker on the wall saying place tv "here" then there was no backer installed.
You'll have to rely on the aluminum wall stud to mount bracket , I wouldn't trust it myself.

Our tv sits on the dresser.

Even if you could get it mounted to a wall stud I'd recommend not leaving tv there for travel.


Turbs

[jtstromsburg]

Originally Posted by f1100turbo

If there's no sticker on the wall saying place tv "here" then there was no backer installed.
You'll have to rely on the aluminum wall stud to mount bracket , I wouldn't trust it myself.

Our tv sits on the dresser.

Even if you could get it mounted to a wall stud I'd recommend not leaving tv there for travel.

Turbs

I thought this too, but there was no sticker in mine but I was able to find the backer. I don't remember where, but somebody gave me estimated measurements , and I know I hit solid backing directly above the window where I mounted a 23" tv.

[ependydad]

Originally Posted by jtstromsburg

I thought this too, but there was no sticker in mine but I was able to find the backer. I don't remember where, but somebody gave me estimated measurements , and I know I hit solid backing directly above the window where I mounted a 23" tv.

I thought Sam had posted about locations of backers in the original "Ask the Sabre Factory" thread back in my early days.

[QCCowboy]

Mine is mounted above the dresser. I had a TV backer sticker, but you can use a magnet to find it. I have pics posted somewhere around here how I found it.

[QCCowboy]

See if this works

http://s1021.photobucket.com/albums/...QBOK/TV Mounts

[QCCowboy]

Here is a pic of the final setup...

[TURBS]

Originally Posted by QCCowboy

Here is a pic of the final setup...

Problem is our plug in and cable hook-up is at the front down low at the dresser on our 2011.
I assume his would be similar?

[QCCowboy]

Could always use extension cord for cable wire, or just make a longer one, and then mount a surge protector on the dresser (behind DVD player to hide it a little.) of course I'm guessing the new one will have it on the ceiling

[SabreSam]

Originally Posted by wowzer

Good morning Sam
Noticed a situation with my dinette slide out and looking for some help. This is on a 2013 Sabre 34REQS-6. As you can tell by the pic the plastic support for the slide out is cracked on the end. Just to the point of where the screw is. I have watched as the slid goes in and out and at this point it seems secure. I'm concerned about the future of this situation though. I guess I'm just looking for some guidance from you as to what I need to do. Fix it of course. LOL


Attachment 41501

Dear Wowzer,
The white bar you see cracked needs to be replaced. If you let this go, it can damage the bottom of the slideout floor. I apologized for the problem, but we are at the mercy of the vendor who produced the bar. If you send me your vin number and full name, I will have our warranty department log this issue in our service system. This will help expedite the authorization process.

Again, I'm sorry for the problem.

[SabreSam]

Originally Posted by okietom

Sam,
I have a 2012 Sabre 34RLQS and I am wanting to mount the TV in the bedroom on the wall over the window above the dresser. I have spoken to dealer and they don't know if there is support for it or not. How can I tell if there is enough support in the wall and if so the correct procedure for mounting bracket.
Build date - 9/7/2011
VIN - 4X4FSRK21C3005650

Dear Okietom,
I will try and locate the information that you are requesting. If you decide to hang the TV on the wall, I believe we recommend a TV no larger than 22" due to weight. I will be in touch.
Sabresam