We picked up our 27DBUD yesterday and I've got a few questions.
1. after we got home noticed 2 bolts on the slide out at the bottom edge. They look like they may be for support jacks for extended periods when the slide out is open. It is a deep slide so it is a good idea to support the slide for long trips.
2. The fresh water tank is heated but I don't see a switch to activate the heater. I'm thinking that it may be thermostat controlled. If that's the case I would think that I should keep at least some water in the tank.
3. The stabilizer jacks are powered. If for some reason the power function fails can the be manually set?
You try to think of all the questions to ask during the PDI but it always seems that when you get home you find stuff you missed. Thanks for the help.
There is no switch to heat the tank. They say the tank is " heated" because it is foamed in up underneath the body and a heat vent from the heater in the camper is right near the top of the tank to keep it warm.
You will probably hear conflicting opinions on the supports for the slide. I do have some slide supports that I use, more because they stabilize the camper than to support the slide. I have read many differing opinions on the slide jacks. Basically from what I have read they are not needed. The bolts you reference are for slide adjustment, i was told don't mess with them by the dealership.