New Salem 30KQBSS

[DougP47]

Originally Posted by grimesb

Anyone out there with a 30KQBSS... Looking to de-winterize mine. Dealer says there are 3 valves I need to "flip"... 2 located under the sink and 1 on the water heater.... Can't find any ??
Any pics or advice would be appreciated.
Thanks!

One by the outdoor kitchen

[DougP47]

One between the wheel wells. Same side

[DougP47]

Heater access mod. Plastic latch broke, installed finder nut ans know 8/32 thread. No problems now. I'm also going to move electric switch inside the control panel with the slide control and tank sensors.

[DougP47]

Remove the anode rod for heater drain.

[Bearcat55]

Originally Posted by grimesb

Anyone out there with a 30KQBSS... Looking to de-winterize mine. Dealer says there are 3 valves I need to "flip"... 2 located under the sink and 1 on the water heater.... Can't find any ??
Any pics or advice would be appreciated.
Thanks!

There is a false wall in the cabinet below the sink. All 3 valves are behind it. It's only held in by two screws that go into the floor. Remove the closest screw and just loosen to back one. This will allow you to slide the panel open and reach the valves. It's definitely tight quarters but you can manage.

[DougP47]

Originally Posted by Bearcat55

There is a false wall in the cabinet below the sink. All 3 valves are behind it. It's only held in by two screws that go into the floor. Remove the closest screw and just loosen to back one. This will allow you to slide the panel open and reach the valves. It's definitely tight quarters but you can manage.

I guess I miss under stood the question. If you need pic's let me know. I changed my square heads out to stud and wing nuts. Easy access now.

[grimesb]

Originally Posted by DougP47

I guess I miss under stood the question. If you need pic's let me know. I changed my square heads out to stud and wing nuts. Easy access now.

Thanks Bearcat
First time de-winterizing and my dealer is none to helpful (gets a little agitated with newbies)
I've never used my fresh water tank but apparently I need to fill it to flush the system? If so I'll have to take a separate hose to the campground won't I? Sorry for all the questions.
Any help is appreciated.