Still plagued with leveling hydraulic problem.
Had a leak in right hydraulic ram. Got it replaced. No leak now but: on level concrete pad when I unload and the unit is level. After I open the slides the side with the 4 slides sinks down 1.75 inches. I have to place two pieces of 2 by 8 lumber under each wheel raising the unit up 1.75 inches so when slides are open its level. Can't get a resolution from Lippert. Short of adding a 6 point leveling system has anyone modified the existing two rams to operate independently or added an additional cylinder midway under the 4 side frame? Very poor design that should be able to be retrofitted.