2016 371REBH Pot lights stopped working

[denali15]

Hey,

As the title says the two lights above the lay-z-boys stopped working in our unit. In the process of tracing where the power comes from...

I got no 12 volt going there anymore.


The power seems to come up from under the slide with the 120 volt but then it goes back in the coach in the back of the unit....

I was wondering if someone knew where the feed comes from or if someone has had a similar issue?

[ingalmi]

Anything else in that area that's 12v? They do some strange things during wire routing and a lot has to do with the manufacturing process of joining the slide to the main body. Look hard at the bottom of the slide where the wiring transitions to go into the slide area, you may find an inline fuse. It's worth the look. Good luck!

[Mikele]

The wire nut connection in mine came loose. Some days it would work some days it wouldn't. I had to remove the bottom of the upper cabinets to gain access. I fixed it by soldering the connection instead. A bit of PIA but not bad.

[ingalmi]

Good job, you never know where you'll find the wiring or connections points