|
03-22-2014, 12:51 PM
|
#1
|
Junior Member
Join Date: Mar 2014
Posts: 4
|
Water pump acting weird
My water pump is pumping, but not running smooth. I have a 365SAQ and cannot see how to get to the water pump easily. How do you get to it? Also, I read that I should check the water pump strainer. Where do I find this? I am concerned that I may be at the beginning of pump failure and I do not want that to happen. Thanks
|
|
|
03-22-2014, 01:16 PM
|
#2
|
Senior Member
Join Date: Sep 2013
Location: Idaho
Posts: 9,839
|
__________________
2016 F350 6.7L LB CC Reese 28K 2014 Chaparral Lite 266sab
"Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety." 2014 19 days camping 2015 17 days camping201620 days camping
|
|
|
03-22-2014, 02:09 PM
|
#3
|
Phat Phrog Stunt Team
Join Date: Aug 2011
Location: Iowa
Posts: 34,507
|
define smooth ?
|
|
|
03-22-2014, 02:54 PM
|
#4
|
Junior Member
Join Date: Mar 2014
Posts: 4
|
water pump
Typically, a pump runs solidly and then stops when the pressure is met. my situation Is that the pump is running like a two cylinder engine that is missing on one cylinder. It seems to be going in and out, in and out. Then when the pressure is met, it will cut off and then on and then off and then on for a minute and then stops.
|
|
|
03-24-2014, 11:46 AM
|
#5
|
Senior Member
Join Date: Mar 2011
Location: Auburn, GA
Posts: 966
|
Sounds as if the pressure is being let off somehow. Have you checked for leaks everywhere? Even small ones? I believe the water pump is in the basement behind the back wall. No, it is not easy to get to. Especially when you wear XXL shirts!
__________________
2012 Sandpiper 365SAQ weighing @ 15k, Onan, 2nd air, slide toppers, TST
2013 F350 6.7L Lariat 4x4 CC DRW,Viair 1007, Ride-Rites, Edge CTS, B&W
2001 Chevy 3500CC DRW 4x4, 8.1L, 4.10 gears w/ Detroit TrueTrac
2001 Ford Excursion Limited 4x4 7.3L,V/B Spring Mod, ProComps, Hellwig Swaybar, & other 'Necessities'
|
|
|
03-24-2014, 12:00 PM
|
#6
|
Junior Member
Join Date: Mar 2014
Posts: 4
|
found it
I found it. It is where you said and somewhat of a tight fit. It does have a screen filter. It had a little trash in it. I was surprised that soo little trash was causing this. But it was, I am hopeful it is fixed. I was glad I went in there because there were some plumbing hoses up against the pump that I was able to tie up and away. Thanks for the feedback.
|
|
|
03-24-2014, 07:22 PM
|
#7
|
Senior Member
Join Date: Jan 2014
Posts: 159
|
How did U get in behind the wall? Is there an access panel?
|
|
|
03-24-2014, 07:51 PM
|
#8
|
Senior Member
Join Date: Mar 2011
Location: Auburn, GA
Posts: 966
|
Quote:
Originally Posted by jrobichaud
How did U get in behind the wall? Is there an access panel?
|
Yes, in the pass through, the back wall has screws in it on the curb side that you take out and that panel comes out. Inverter, water pump, heat ducts, water heater and water lines are all back there.
Monty
__________________
2012 Sandpiper 365SAQ weighing @ 15k, Onan, 2nd air, slide toppers, TST
2013 F350 6.7L Lariat 4x4 CC DRW,Viair 1007, Ride-Rites, Edge CTS, B&W
2001 Chevy 3500CC DRW 4x4, 8.1L, 4.10 gears w/ Detroit TrueTrac
2001 Ford Excursion Limited 4x4 7.3L,V/B Spring Mod, ProComps, Hellwig Swaybar, & other 'Necessities'
|
|
|
03-25-2014, 05:46 AM
|
#9
|
Junior Member
Join Date: Mar 2014
Posts: 4
|
If all you want to do is get to the water pump then:
There are three screws on the wall to the left of the main water panel(across from the light on the forward wall). removing those three screws will allow the wall to come out and you can then reach behind the main panel to access the pump
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|