Manual for Remote Control

[shadow42]

I recently purchased a new Forest River Wildwood X-lite 171 RBBXL. The manual for the remote control is missing.
Powered it up and all I get is all lights blinking. Need info to set up and use. Not hocked up to ac power. Any help would be appreciated.

[Iwannacamp]

Does this help. I think it’s https://venturecomm.net/assets/uploa...te-control.pdf

[shadow42]

Thanks for your reply. I need to know how to set up the remote to operate stab jacks, interior lights ect. Did not get a manual with the camper from Camping world. Purchased new from them. How can I get a manual or instructions? /Thank you again.

[CedarCreekWoody]

Mine only works stabilizer jacks and slideouts. It came preprogrammed and yours should have. I suggest returning to your dealer.

[D W]

Originally Posted by shadow42

Thanks for your reply. I need to know how to set up the remote to operate stab jacks, interior lights ect. Did not get a manual with the camper from Camping world. Purchased new from them. How can I get a manual or instructions? /Thank you again.

Do you have the LCI Multifunction Wireless System?

[SunseekerFunseekers]

If you're looking for a manual or instructions, I suggest going to the Forest River site.

You stated "new" but that could be 2018, 2019, or now even a 2020 model.

The only "Wildwood X-lite" I could find on the F River site was for a travel trailer, but there are some "Wildwood" Fifth Wheels as well...

In any case, I would start here - the site/manuals are pretty easy to navigate.

Please let me know if this helps! THANKS

https://forestriverinc.help/#/forest...-x-lite/browse

[Bama Rambler]

There are several different remotes for these units. Can you post a picture of the one you have. There should be a manual on the LCI site for it.

Do you know where the receiver is located? You're going to need access to it in order to program the remote.

[Sebourn]

Originally Posted by shadow42

I recently purchased a new Forest River Wildwood X-lite 171 RBBXL. The manual for the remote control is missing.
Powered it up and all I get is all lights blinking. Need info to set up and use. Not hocked up to ac power. Any help would be appreciated.

If you have one like this, I'd be glad to scan my manual tomorrow and PM you. (Scanner is at office and I'm home this afternoon)
If you are only getting blinking lights when you turn power on, hold down the "select" button until the scrolling blinking lights stop on only one thing. Punch "select" again and light will move to next item. Mine works the awning lights, awning, and stabilizers.

[jgump]

What Sebourn said. Hold down select until blinking stops then push select to operate whatever you need

[shadow42]

I figured it out. Got it working. No thanks to Camper World. Boy they sure have went down hill. Service and sales. After the sell your are told to call the factory or Waite for 3 months if some thing is wrong/broke. Told they are to busy. Go to your local dealer. You may have to pay a little more but in the end you will be better off.

[Mizterusa]

At least you got a remote..... ��