Slide out, stabilizers, awning and front jack not working.

[Qcrew]

I have a 2014 wildwood and my slide out, stabilizers, awning and front jack have stopped working. When you mash the switch you can hear the motors engage but there is no movement or just a very slight movement. I have connected to 110 and also connected to the truck while it was running. Fuses and breakers are good in the box. The inline fuse from battery to front jack was good but I even put a new one in jury in case. Are there any fuses or inline relays from the battery back to the camper I am missing? Seems like there has to be.

[bob caldwell]

Everything that doesn't work is 12 volt......follow the red wire ( connected to battery positive) to the little junction box, it's really a resettable circuit breaker with a little button on it.....

[SYE]

Sounds like dead battery to me

[crunchman12001]

Originally Posted by SYE

Sounds like dead battery to me

X2

[DFW Rusty]

Originally Posted by SYE

Sounds like dead battery to me

X3

Is it doing this even when it's plugged in? If it is doing it while it's plugged it then start tracing the power to find out where it stops. It could be as simple as a loose connection on the battery or inverter.

If it is not plugged in then your battery is most likely dead. On my 2015 the battery wont hold a charged more than a couple days if I don't connect to shore power.

[CedarCreekWoody]

If you are hearing some sound it is most likely not a blown fuse. It is more likely a loose connection as mentioned above or a corroded connection. Start checking connections.