|
05-14-2011, 08:15 PM
|
#1
|
Senior Member
Join Date: Feb 2011
Location: No longer own a Forest River product, but enjoy the info on this site
Posts: 309
|
Riser Kit on 23lb (same as 2306)
So I purchased a riser kit from the factory for our 23LB. The riser kit is a basic bolt on application. Definitely looks like something that can be installed with some basic 'know how' -- does anyone have any experience and feedback on how to install this kit.
My basic concern is achieving axle alignment with this install.
Anyone that has changed or removed an axle should have some feedback...
the kit will provide enough lift for the 14" rims and new tires. And will give us enough 'comfort room' for some travel in more 'off road like' conditions.
Thanks for your input!
Darren
|
|
|
05-16-2011, 08:06 PM
|
#2
|
Senior Member
Join Date: Feb 2011
Location: No longer own a Forest River product, but enjoy the info on this site
Posts: 309
|
perhaps I should have posted this question under another forum topic......
no responses, but found some useful info on the "axles coming loose" link very useful!
here's a forest river product with a riser kit... looks ridiculously tall don't you think???
RVs For Sale : Recreational Vehicles For Sale : Motorhomes For Sale
|
|
|
05-17-2011, 09:43 PM
|
#3
|
Junior Member
Join Date: Apr 2011
Posts: 3
|
Quote:
Originally Posted by teamgl
|
The riser kit is just bolt on you jack up the unit secure it front and rear with heavy duty jack stands drop the axles bolt the kit on reinstall the axles all the kits I've seen have the notch for axles you shouldn't be able to mess it up .
|
|
|
05-17-2011, 09:49 PM
|
#4
|
Senior Member
Join Date: Jan 2011
Location: Saint Cloud FL
Posts: 1,565
|
Are you sure it has the Riser Kit - almost looks like they used the stabilizers to jack the Roo off the ground almost.
subscribed - I would be intrested in seeing what it looks like after you install the kit Darren
I bet that would help me in the fact of not having so much drop in my shank.
What did the kit cost you if I can ask?
__________________
2011 Rockwood Mini Lite 2306 - Matt
2004 Dodge Ram 1500 Qaud Cab 4x4 with 35" tires and 3.92 gears, Dynatech Longtube Headers & Fabtech 6" lift + Superchips with shift Tuning
Nights Camped 2011 (37) - 2012 (16)-2013 (2) -2014 (5) -2015(0)
USMC 91 - 95 - F/A-18 Aviation Ordnance
|
|
|
05-17-2011, 10:19 PM
|
#5
|
Senior Member
Join Date: Feb 2011
Location: No longer own a Forest River product, but enjoy the info on this site
Posts: 309
|
Quote:
Originally Posted by sherdep
What did the kit cost you if I can ask?
|
The riser kit from the factory was $150 ish. it looks easy enough to install. After seeing the photo from the link above, I wonder if it is necessary to lift the trailer that much. I just want to achieve enough lift to accommodate my 'heavy duty' 14"rim/tire combo. I am kinda thinking about installing a 1/2" shim between the axle and the frame... that would be enough.
I'll keep you posted.
BTW -- With my new lift / tire combo, this will raise the trailer 4". the riser kit alone is 2.75" of lift.
Darren
|
|
|
05-17-2011, 10:34 PM
|
#6
|
Senior Member
Join Date: Jan 2011
Location: Saint Cloud FL
Posts: 1,565
|
Quote:
Originally Posted by teamgl
The riser kit from the factory was $150 ish. it looks easy enough to install. After seeing the photo from the link above, I wonder if it is necessary to lift the trailer that much. I just want to achieve enough lift to accommodate my 'heavy duty' 14"rim/tire combo. I am kinda thinking about installing a 1/2" shim between the axle and the frame... that would be enough.
I'll keep you posted.
BTW -- With my new lift / tire combo, this will raise the trailer 4". the riser kit alone is 2.75" of lift.
Darren
|
I am running almost 11" of drop on the shank - 4" would help raise the trailer as well as the plumbing in the back - have ran into a place where the plumbing was lower then the curbing that the tube had to go over.
can you post a picture of the kit and possibly a part # - I might be intrested in this kit
Unless I decide to go back to stock tires and then I may not even need the kit but well worth a looksy for that cheap amount
__________________
2011 Rockwood Mini Lite 2306 - Matt
2004 Dodge Ram 1500 Qaud Cab 4x4 with 35" tires and 3.92 gears, Dynatech Longtube Headers & Fabtech 6" lift + Superchips with shift Tuning
Nights Camped 2011 (37) - 2012 (16)-2013 (2) -2014 (5) -2015(0)
USMC 91 - 95 - F/A-18 Aviation Ordnance
|
|
|
05-18-2011, 06:09 PM
|
#7
|
Senior Member
Join Date: Feb 2011
Location: No longer own a Forest River product, but enjoy the info on this site
Posts: 309
|
This is the reason I need to lift the camper....
The new tires are 26.6" tall and are 10 ply Super Traxion LT. The stock tires are 24" outside diameter. The other photo is of the lift block that will be placed between the axle and the frame.
When I find a PDF of the instructions for the lift, I'll upload that. The Forest River part number for the lift is FT-22
|
|
|
05-18-2011, 06:16 PM
|
#8
|
Senior Member
Join Date: Feb 2011
Location: No longer own a Forest River product, but enjoy the info on this site
Posts: 309
|
Quote:
Originally Posted by Affordablerv.net
The riser kit is just bolt on you jack up the unit secure it front and rear with heavy duty jack stands drop the axles bolt the kit on reinstall the axles all the kits I've seen have the notch for axles you shouldn't be able to mess it up .
|
Thanks for the feedback! The instructions call for brake lines to be extended... That should be easy enough.. the electric brake lines look like there's plenty of extra length to accommodate the lift. have to get up under the trailer to figure that one out though.
Darren
|
|
|
05-18-2011, 07:27 PM
|
#9
|
Senior Member
Join Date: Jan 2011
Location: Saint Cloud FL
Posts: 1,565
|
thanks for sharing the pictures and the part #
Cant wait to see it when you get it done
__________________
2011 Rockwood Mini Lite 2306 - Matt
2004 Dodge Ram 1500 Qaud Cab 4x4 with 35" tires and 3.92 gears, Dynatech Longtube Headers & Fabtech 6" lift + Superchips with shift Tuning
Nights Camped 2011 (37) - 2012 (16)-2013 (2) -2014 (5) -2015(0)
USMC 91 - 95 - F/A-18 Aviation Ordnance
|
|
|
06-04-2011, 08:44 PM
|
#10
|
Senior Member
Join Date: Feb 2011
Location: No longer own a Forest River product, but enjoy the info on this site
Posts: 309
|
Didn't install the FR riser it, but put .5" shims between the axle and the frame for a little lift... also got the new shoes installed.
This gave about 1.8" overall lift over stock.
I'm very pleased with the results.
|
|
|
06-04-2011, 09:01 PM
|
#11
|
Senior Member
Join Date: Jan 2011
Location: Saint Cloud FL
Posts: 1,565
|
Darren - that looks pretty awesome - wonder how well it will flex without rubbing though
did the .5" shim also fix the space of the axle seperating from the frame issue as well?
__________________
2011 Rockwood Mini Lite 2306 - Matt
2004 Dodge Ram 1500 Qaud Cab 4x4 with 35" tires and 3.92 gears, Dynatech Longtube Headers & Fabtech 6" lift + Superchips with shift Tuning
Nights Camped 2011 (37) - 2012 (16)-2013 (2) -2014 (5) -2015(0)
USMC 91 - 95 - F/A-18 Aviation Ordnance
|
|
|
06-04-2011, 09:10 PM
|
#12
|
Senior Member
Join Date: Feb 2011
Location: No longer own a Forest River product, but enjoy the info on this site
Posts: 309
|
Matt --
the clearance is close on the 'passenger side' but bounced up and down on the rear bumper and could still see plenty of light between the tire and inner finder. (keeping my fingers crossed that this works.)
My neighbor helped me align the axles so they are 'square with the world.'
I don't know that the shim helped with the axle seperation issue, but we torqued the heck out of the grade 8 nuts... that'll hold em
I have a factory riser kit (less 8 nuts and bolts) for sale if you want. CHEAP.
Pleased with the results.
Darren
|
|
|
06-04-2011, 09:22 PM
|
#13
|
Senior Member
Join Date: Jan 2011
Location: Saint Cloud FL
Posts: 1,565
|
I would hang on to the Riser kit until you take it out and try the trailer the way it is and then sell the kit.
How much is cheap? LOL
Very tempting but if I wasnt in the process of deciding on either 4.56 gears or going back to the stock tires on top of putting a class IV or V hitch on my truck I would possibly hit you up on the riser kit even though I really dont need it except for looks to raise it with the truck LOL
__________________
2011 Rockwood Mini Lite 2306 - Matt
2004 Dodge Ram 1500 Qaud Cab 4x4 with 35" tires and 3.92 gears, Dynatech Longtube Headers & Fabtech 6" lift + Superchips with shift Tuning
Nights Camped 2011 (37) - 2012 (16)-2013 (2) -2014 (5) -2015(0)
USMC 91 - 95 - F/A-18 Aviation Ordnance
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|