2011 Flagstaff Model FLF8528RKWS. Need to remove the TV in the front room. How do I release the bracket holding it? Thanks for all those taking the time to answer.
Mike Clay
__________________
Randy and Janie Veach
2008 Forest River Lexington 255 GTS
Mine is just a wedge-style mount. A little upward pressure and out it came. OK, it took more than a little. I was unsure how it came off and was trying to be careful but in the end, I couldn't find any locks or anything so I just kept pushing upward a little harder, then a little harder, than a little harder until came out.
Mine is just a wedge-style mount. A little upward pressure and out it came. OK, it took more than a little. I was unsure how it came off and was trying to be careful but in the end, I couldn't find any locks or anything so I just kept pushing upward a little harder, then a little harder, than a little harder until came out.
Mine comes out the same way. Took some effort and some side to side rocking.
__________________
Brad, Sandy, Amber (shephard), Niko (shiba inu RIP little buddy)
There should be a light gage wire/cable that runs down the right side, behind the T.V. and terminates just below the T.V. being held with a screw. Once screw is removed lift the TV up to slide it out of the bracket.
Linear Mode
