|
05-20-2017, 03:53 PM
|
#1
|
Member
Join Date: Aug 2016
Posts: 59
|
Wardrobe slide owners
We have a 2016 26RLWS. I'm not sure my wardrobe slide is going out as far as it's supposed to. We asked the dealer and he says it is but the gap seems pretty big. I've included a picture. Does this look right? Thanks!
__________________
2015 Chevy 2500HD
2021 Flagstaff 26FKBS
2016 Apricot Labradoodle "Lilly"
|
|
|
05-20-2017, 03:57 PM
|
#2
|
Senior Member
Join Date: Sep 2013
Location: Texas
Posts: 1,183
|
Quote:
Originally Posted by dugwms
We have a 2016 26RLWS. I'm not sure my wardrobe slide is going out as far as it's supposed to. We asked the dealer and he says it is but the gap seems pretty big. I've included a picture. Does this look right? Thanks!
|
We have a 8289WS with a wardrobe slide. When the slide is out there is no gap like what I see in your picture. Looks like yours could use some adjustment.
__________________
Joe & Beverly
2014 Ram 2500 CTD, CC, SB
2014 8289WS lifted
|
|
|
05-20-2017, 03:59 PM
|
#3
|
Senior Member
Join Date: Sep 2013
Location: Texas
Posts: 1,183
|
You could go to any dealer and look at RV's with the wardrobe slide extended. I think you will see no gap like what is in your picture
__________________
Joe & Beverly
2014 Ram 2500 CTD, CC, SB
2014 8289WS lifted
|
|
|
05-20-2017, 04:00 PM
|
#4
|
Senior Member
Join Date: May 2013
Location: Missouri
Posts: 908
|
Quote:
Originally Posted by dugwms
We have a 2016 26RLWS. I'm not sure my wardrobe slide is going out as far as it's supposed to. We asked the dealer and he says it is but the gap seems pretty big. I've included a picture. Does this look right? Thanks!
|
When it is about 1/2 out, you can see all the chains and cables and there is an adjustment there for the "stop".
__________________
Mark B.
2021 GMC 1500
Anderson WDH
|
|
|
05-20-2017, 04:09 PM
|
#5
|
Member
Join Date: Aug 2016
Posts: 59
|
Thanks everyone. I've been researching how to adjust it. I'll be doing it myself, if possible. Thanks again.
__________________
2015 Chevy 2500HD
2021 Flagstaff 26FKBS
2016 Apricot Labradoodle "Lilly"
|
|
|
05-20-2017, 05:22 PM
|
#6
|
Member
Join Date: Aug 2016
Posts: 59
|
Not having any luck finding documentation on how to adjust the slide travel. Does anyone know where I can find adjustment information? Thanks.
__________________
2015 Chevy 2500HD
2021 Flagstaff 26FKBS
2016 Apricot Labradoodle "Lilly"
|
|
|
05-20-2017, 06:09 PM
|
#7
|
Mod free 5er
Join Date: Mar 2008
Location: Concord, NC
Posts: 24,702
|
Here you go.
__________________
|
|
|
05-20-2017, 10:29 PM
|
#8
|
Member
Join Date: Aug 2016
Posts: 59
|
I really appreciate the links but they aren't for the slide we have. Ours is a Lippert/Schwintech in-wall slide.
__________________
2015 Chevy 2500HD
2021 Flagstaff 26FKBS
2016 Apricot Labradoodle "Lilly"
|
|
|
05-20-2017, 10:54 PM
|
#9
|
Member
Join Date: Aug 2016
Posts: 59
|
Finally found documentation. Just in case anyone else should ever need these: https://www.lci1.com/support-in-wall%C2%AE-slide-out
__________________
2015 Chevy 2500HD
2021 Flagstaff 26FKBS
2016 Apricot Labradoodle "Lilly"
|
|
|
05-21-2017, 10:10 AM
|
#10
|
Senior Member
Join Date: Jan 2016
Location: x
Posts: 12,423
|
Are you holding the control for 5 to 10 seconds after the slide reaches its stops either when opening or closing as recommended by the mfg?
__________________
Retired Navy
Jake my sidekick (yellow Lab) 10/04 - 05/20
2017 RAM 2500 CC 4X4 Cummins Diesel
2016 Flagstaff 26 FKWS
AF&AM & El Korah Shrine of Idaho
|
|
|
05-21-2017, 10:22 AM
|
#11
|
Senior Member
Join Date: Apr 2017
Posts: 645
|
Different slide, but I caught something similar during our pdi. Two of my four slides were not seating properly when fully extended. 3" gap between the lip of the slide and the seal on one side. The slides were cockeyed.
__________________
-- My wife complains I never listen to her. Or something like that.
2017 Heritage Glen 368RLHBK Limited
2017 Ram 3500 4x4 Crew, 6.7 Cummins
|
|
|
05-22-2017, 02:21 PM
|
#12
|
Member
Join Date: Aug 2016
Posts: 59
|
We are holding the button and I tried "retiming" it hoping that would have some affect but it did not. I've got a call in to our dealer.
__________________
2015 Chevy 2500HD
2021 Flagstaff 26FKBS
2016 Apricot Labradoodle "Lilly"
|
|
|
06-13-2017, 11:06 AM
|
#13
|
Mountain Lovers
Join Date: Jul 2009
Location: Fayetteville, NC
Posts: 51
|
We have a Flagstaff 8528RSWS with the wardrobe slide and there is no gap like in your picture. Have the dealer adjust the cables and you should be fine...
|
|
|
06-19-2017, 06:51 PM
|
#14
|
Member
Join Date: May 2008
Location: N.E. Pa.
Posts: 45
|
If you look on the wall behind the slide sides when fully retracted you will see that beside the seal mounted on the wardrobe there is a plastic channel mounted to the wall that has a rubber gasket that slides in place over the plastic. The two seals are what causes it to protrude. You will need to occasionally put some kind of lube on the rubber wall seal as they will probably stick together at some point. Recently had that pleasure when setting up at a campground and it pulled the wall seal out of the channel. It was great fun placing it back. In the mean time I used baby powder on the seals to prevent sticking.
Good Luck.
Doug
__________________
Doug, Virginia, Buster & Sam
2017 Ram Crewcab 2500 6.4 Hemi Delmonico Red Pearlcoat
2015 Flagstaff 27RLWS
2005 Road King
5 Grandkids
Brianna,Frankie,Tyler,Tori&Jocelyn
|
|
|
06-20-2017, 06:50 AM
|
#15
|
Senior Member
Join Date: Jun 2016
Location: PSL Florida
Posts: 122
|
Quote:
Originally Posted by dugwms
|
Great link. Thank you!
|
|
|
08-20-2017, 12:25 PM
|
#16
|
nmdcporter
Join Date: Jul 2017
Location: New Mexico
Posts: 34
|
I have the 2018 Flagstaff 27RLWS and my wardrobe looks exactly like yours when opened. I noticed I have a cushion at the top of the slide that is against the wall. I called the dealer and I was told the slide is extended completely. I was told the gap is due to the slide motor sitting on top of the slide. If you find different please let me know, my trailer is still under warranty but I live a ways from the dealer and don't want to haul it over there unless necessary.
|
|
|
08-22-2017, 04:55 PM
|
#17
|
Senior Member
Join Date: Aug 2012
Location: Deland, Florida
Posts: 354
|
We have a 2604WS Rockwood and I am pretty sure it is the same slide. Ours stared not going all the way out like your photo. Problem ended up being a bad motor.
|
|
|
08-22-2017, 06:12 PM
|
#18
|
Member
Join Date: May 2008
Location: N.E. Pa.
Posts: 45
|
If you will read my previous reply to OP you will see that it is designed that way. Your dealer is absolutely correct. Have had our 27RLWS for over 2 years and never a problem with the wardrobe slide except for side seals sticking as indicated in original reply. Relax and enjoy your new TT. Except for some minor glitches with ours which I have taken care of we are extremely pleased with the TT especially the floor plan.
Doug
__________________
Doug, Virginia, Buster & Sam
2017 Ram Crewcab 2500 6.4 Hemi Delmonico Red Pearlcoat
2015 Flagstaff 27RLWS
2005 Road King
5 Grandkids
Brianna,Frankie,Tyler,Tori&Jocelyn
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|