2018 5th wheel 8301WS

[NJLOAD]

Can anyone with this rig enlighten me on how to use the anti-freeze intake and where the valves are to use this? I removed the panel in the front storage compartment and found the water pump along with a ton of heater vents and various other crammed in a small space stuff but the generic manual and lack of sales person knowledge has left me wondering. YouTube is pretty much generic on this model also with not much but walk through's.

Any help is appreciated.

[Mr. Dan]

Do you have a water compartment panel similar to this?

[NJLOAD]

No nothing like that. I will have to post some pictures when I figure out how.

[Mr. Dan]

Originally Posted by NJLOAD

No nothing like that. I will have to post some pictures when I figure out how.

See if this helps.

Originally Posted by Janet H

• Click reply and scroll down to bottom of text box.
• Click "go advanced" add text to message window and then scroll down.
• Click "Manage attachments" A separate window will pop up.
• Click "browse" Then select the file to be uploaded. Be sure that the photo is appropriately sized. 620 x 620 pixels (or smaller) and no more than 50K. Forums software will automatically reduce the size, but smaller size photos will upload much faster. You may select several photos to upload at the same time by repeating the last step.
• Click "Upload" After pics have loaded close the pop-up window
• Click "submit reply" to mount the text of your message - photos will automatically appear at the bottom of your post.

How to embed an image stored on another site:
You can do this by using image tags. Upload the image to a service like imageshack and then copy the URL of the image and put that between [IMG] tags. That will work well, as long as the host site stays in business and doesn't disable your image for overuse of bandwidth etc.

You can also paste in the location of a photo stored here in a photo gallery.

To do this: Paste the url of the image into your post. Then add the following code on either side of the url (with no extra spaces):

[IMG]url here[/IMG]

The image will appear where the url was in your text.

[WFD]

By your pump you should have a valve that needs to be turned in order to bypass drawing from your fresh water tank and will siphon directly from your antifreeze jug that you will have outside. The valve you are looking for will look just like your bypass valves on your hot water tank. You will need a short length of hose to go from the antifreeze intake on the outside of your unit down into the jug of antifreeze.