|
03-19-2018, 08:05 PM
|
#1
|
Junior Member
Join Date: Feb 2018
Posts: 22
|
2018 WJ Stereo Issues
Any ideas/suggestions?
My FM stereo is all primarily "static", like the AM side. 2 very local stations, one, I can't get at all, which is the most dominant for 100 miles around, and the other, a real faint sound of the radio broadcast, and full of static.
So, obviously, the connection is there.
|
|
|
03-21-2018, 03:32 AM
|
#2
|
Member
Join Date: Apr 2013
Posts: 91
|
Sounds like it could be an antenna issue. Even though the iRV systems are not the greatest, I can still listen to local radio stations if I were in my vehicle. Might start om the roof at the antenna and work your way back to the receiver. Could be a wire issue. Good luck.
__________________
2017 Rockwood Ultra V 2618VS
2017 GMC Sierra 1500 SLT Crew Cab Z71, 5.3 EcoTec V8
Nights Camped: 28 in 2022; 33 in 2021
|
|
|
03-21-2018, 12:02 PM
|
#3
|
Member
Join Date: Dec 2015
Location: Stafford, VA.
Posts: 74
|
I would pull out the receiver and check the connections on the back. The antenna cable may not be plugged in tightly. Then go up on the roof to inspect the antenna.
Ken
__________________
2018 Rockwood 2706WS
2007 Ford F-350
|
|
|
03-21-2018, 05:43 PM
|
#4
|
Junior Member
Join Date: Feb 2018
Posts: 22
|
Quote:
Originally Posted by rvee-nut
I would pull out the receiver and check the connections on the back. The antenna cable may not be plugged in tightly. Then go up on the roof to inspect the antenna.
Ken
|
I've been on the roof, and the antenna is well sealed, so a strikeout there. Then to the receiver, and I cannot figure how to get it out of the cabinet. No screws, so I guess some sort of internal clips. Afraid to apply too much pressure, for fear of damaging it or the cabinet.
|
|
|
03-22-2018, 12:25 AM
|
#5
|
Senior Member
Join Date: Jul 2015
Location: Somewhere in the Ozarks...
Posts: 1,133
|
There is a plastic trim, or beauty ring around your receiver. Pry that off and you'll find your screws. But be careful; don't break it.
__________________
2015 Forest River Rockwood Signature Series Ultra Lite 8289WS w/Diamond pkg.
2014 RAM CTD 6.7 Tradesman 4WD Auto Crew Cab Long Bed
Honda eu2200i generators
|
|
|
03-22-2018, 07:36 AM
|
#6
|
Member
Join Date: Dec 2015
Location: Stafford, VA.
Posts: 74
|
Bob is correct. If you have the iRV receiver, look around the sides near the panel surface and you will see where to put a flat blade screwdriver to pop off the cover. Be gentle. Underneath you will see 4 screws holding receiver to the panel.
Ken
__________________
2018 Rockwood 2706WS
2007 Ford F-350
|
|
|
03-22-2018, 11:01 PM
|
#7
|
Junior Member
Join Date: Nov 2017
Posts: 17
|
On my iRV unit, the amount of static on the radio AM band is directly proportional to the number of LED lights that are on. Also, the WFCO converter contributes a significant amount of interfering noise on the DC circuits. You might want to see if your source of static is similar to my problem. I haven't developed a good trash filter, yet.
|
|
|
03-23-2018, 06:07 AM
|
#8
|
MCTroy
Join Date: Sep 2014
Location: Troy.Ohio
Posts: 1,176
|
Good advise on pulling out radio. I installed our radio last year and don't have FM reception. There are dozens of wires back there. Any idea what color or size the antenna wire is? I thought I had everything pulled in since tv snd DVD all play. If the O P fixes their FM reception please post how. Thanks!
__________________
2015 Windjammer 3029 Diamond Edition
2018 Ram 2500
Ohio River Rat
|
|
|
03-24-2018, 09:46 AM
|
#9
|
Member
Join Date: Dec 2015
Location: Stafford, VA.
Posts: 74
|
MCTroy -- The antenna wire is black coaxial cable, much bigger than the rest of the wires. It has a single pin push-in connector on the end. The FM reception is OK and it does a good job pulling in strong stations. It is quite noisy on weak stations. The AM reception is lousy, pulling in only very strong stations. There is a lot of static and noise, probably created by the lights and converter.
Ken
__________________
2018 Rockwood 2706WS
2007 Ford F-350
|
|
|
03-24-2018, 01:47 PM
|
#10
|
Junior Member
Join Date: Mar 2018
Posts: 1
|
Is anyone having problems reading the LED readout on the IRV31 Radio in the Mini Lites, my wife and I can not see them as they are very dim?
|
|
|
03-24-2018, 06:55 PM
|
#11
|
Senior Member
Join Date: Apr 2013
Posts: 215
|
well having had a similar problem on a new trailer, it was believed that the wrong antennae was placed on the unit. It is also believed that the manufacture, corrected the problem by slicing the correct wire in which did not hold. The solution, I forfeited the AM stations altogether, and using an FM splitter and coax cable, split the signal from the TV (wingard) antennae with the radio. It works fine now, but again no AM stations. Good Luck!
|
|
|
03-24-2018, 07:46 PM
|
#12
|
Senior Member
Join Date: Apr 2016
Location: Texas
Posts: 781
|
On my 2016 3029W the TV antenna is on the roof, but the radio antenna is just outside the door on the wall. Little lift up & extend thing, like on a portable radio.
Tuckerdog1
__________________
2016 RAM 2500 Cummins SLT Lone Star 4X4 LB
2016 Windjammer 3029W Platinum
I'm not an expert. But I play one on the internet.
You live & learn or you don't live long.
If you don't punish your children, life will.
|
|
|
03-25-2018, 07:25 AM
|
#13
|
MCTroy
Join Date: Sep 2014
Location: Troy.Ohio
Posts: 1,176
|
Rveenut, thank you. I remember that black cable. I will check to be sure I have it pushed all the way in.
__________________
2015 Windjammer 3029 Diamond Edition
2018 Ram 2500
Ohio River Rat
|
|
|
04-21-2018, 08:57 PM
|
#14
|
MCTroy
Join Date: Sep 2014
Location: Troy.Ohio
Posts: 1,176
|
Quote:
Originally Posted by MCTroy
Rveenut, thank you. I remember that black cable. I will check to be sure I have it pushed all the way in.
|
Just a quick update -- the FM Radio works! I pulled the black cable out as it was plugged into the wrong spot. Moved that and now the radio plays great and all is good.
Thank you for the help!
McTroy
__________________
2015 Windjammer 3029 Diamond Edition
2018 Ram 2500
Ohio River Rat
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|