3008 windjammer sewer hose storage
I made my own Rhino 15' sewer hose storage to prevent the hose from getting rusty in the bumper.
1 10' thin wall 4" PVC sewer pipe from LOWE'S About $8.00
2 Threaded PVC plugs
2 Adapters to glue on the thin wall pipe for the plugs
2 Small black plastic boat cleats (to screw to the plugs, to help remove
the plugs with out a wrench)
1 can of PVC glue
4 Stainless hose clamps, Available from Lowe's
Use hacksaw to remove part of the lugs from the Rhino hose so it
will fit into 4" PVC pipe, use Dremel or rough file, sand paper to dress
hacksaw cuts. Drill 3/16" holes mid-way of stainless clamps.
Underneath your Windjammer you will see aluminium strips that hold
the under-belly enclosure. Use four evenly spaced screws to attach
the SS clamps into the strips. I installed two storage pipes for two 15'
Rhino flex hose. I have two outlets under my 8285WS.
I used a clear storage container with lid from WALLY-WORLD to store
rubber gloves, extra fittings, 5" Rhino sewer hose.
Sid, Lois & HRH MISSY Terrible 2s SHIH TZU
2011 ROCKWOOD 8285 WS
2014 F-250 KING RANCH PS/SD/6R140/BFT
BOLIY PRO 3600SI GEN
DAYS CAMPED 2016 57 DAYS