New Rockwood 2109s Owners - Our First Week on the Road

[Malojeer]

I took the front cover off the shower pan in the front where the heater vent located and found the the front wooden supports flex since the are not fastened to floor, used two L brackets and screwed to floor and it stiffened it up and took the flexing out. It flexed enough that in time pan would have cracked.

[Harris85]

Originally Posted by Malojeer

I took the front cover off the shower pan in the front where the heater vent located and found the the front wooden supports flex since the are not fastened to floor, used two L brackets and screwed to floor and it stiffened it up and took the flexing out. It flexed enough that in time pan would have cracked.

Thanks. I will pass this information on to my husband. Enjoy your camper.

[Abcall]

Originally Posted by doulos

I realize this is an old thread but... This is good to read! My wife and I are planning on a 2109S later this year and we have a Tacoma with tow package. I was afraid the TT was too much for it but now, I'm afraid the water tank is gonna fall off!

I guess there's nobody who makes a TT without issues.

Anywho... good to know my Tacoma can pull it. Thanks!

If you're planning on traveling through the Mountains (i.e. Rockies) you might have some towing problems. Those 7000 ft summit can get pretty steep.

[metalsideup]

My showrr base flexes quite a bit. I had to open up that little access door in the shower base to run some wires, and was a bit shocked at what I saw under there. The only support structure between the floor and underneath the shower base was a piece of 2x4 on end at the base center.

[doulos]

Originally Posted by Abcall

If you're planning on traveling through the Mountains (i.e. Rockies) you might have some towing problems. Those 7000 ft summit can get pretty steep.

Yup. Staying away from mountains for now. Maybe a new truck next year!

[Markval]

Got a GMC 2500 HD and pulls the 2109s like there's no tomorrow

[doulos]

Originally Posted by Markval

Got a GMC 2500 HD and pulls the 2109s like there's no tomorrow Attachment 133613

Okay, now I'm officially jealous!

That's really great, congratulations!

[Markval]

Originally Posted by doulos

Okay, now I'm officially jealous!



That's really great, congratulations!

Thanks
We were pulling it with a 2003 1500 Silverado and it did ok but was getting tired.

[Captn]

Add us to the list of new 2109s owners! Plan to do the PDI next week and finalize the paperwork on our 2018 model, then pull it home and practice camp in the yard to get used to everything and stock her up!

[Markval]

Congrats on your new 2109. We love ours and have had it out quite a lot since getting it in the last part of August. It's perfect for a couple. Have had very little problems with it nothing I can't handle.

[doulos]

Originally Posted by Captn

Add us to the list of new 2109s owners! Plan to do the PDI next week and finalize the paperwork on our 2018 model, then pull it home and practice camp in the yard to get used to everything and stock her up!

Very cool! Congratulations!

[Scouter]

We have a 2012 21FBRS and the plastic wheel wells have holes worn in them from what I assume would be the tires rubbing on them. What is the lift kit part number? I think I need to investigate that.