Has anyone put a TV mount in the bedroom of the Rockwood 2904SS? There is a spot on the bedroom wall that has a TV mount spot labeled but I don't know what's back there as far as size and thickness goes. It seems that only a small screen will fit or you would be bumping into it all the time. I don't see carrying the big 32" LCD back and forth.
If anyone has done this, what mounting hardware did you use?
I have a 8329ss Rockwood and I put a 29" in the bedroom with a swivel mount where the TV mount sticker was I talked to forest rover an they sent me a copy of the build blueprint for the wall in my bedroom all there is in the wall is a flat metal plate on the back side of the wall the easiest way to find is a good size magnet a stud finder does not work use medium self tapping screws an pretty drill hole no more than half the size screws being used make sure they are short you don't want to go through your outside wall hope this help
I wanted to keep the bracket in the bedroom the same as in the living area and the bracket the factory installed on the outside the same. I pginingosted or another RV 2306 this;
The bracket just allows for viewing adjustment. The quick disconnect mounts to the bracket, so that way you just slide the tv off & move to the outside, keeping the same quick disconnect.
Linear Mode
