Originally Posted by 8261ss
Is there any adjustment for the living room slide-out on a 8261SS? The slide on ours looks out of alignment when closed. The top is tight to the side of the trailer but the bottom looks like it could still go in another inch or two. The rubber seal is touching but not compressed.
The slides are adjustable for stowed and opened position by the set nuts on the rams, side to side centering in the hole and tilt from top to bottom are also adjustable. There was some very good information on this somewhere I found on how to adjust things, I will try and dig it up.
What I have done in the past is to open the slides, have my wife watch the gap between the slide and the wall and then slowly adjust the nuts to compress the gap until she says to stop. I don't try and go tight to the wall but just to make sure the seals are slightly compressed. I have adjusted both my living room slides in the past for this.