upgraded furrion tv

[Jaz 1960]

I recently upgraded my 24" furrion tv to a 28" samsung smart tv. I hooked it up the same as the furrion but i have no sound from speakers but i have sound from dvd.My radio model is the irv32. Any ideas appreciated , my tt is a 2018 Rockwood 2304ks. Thanks , Joe

[007matman]

Check the audio output settings in the menu on the Samsung TV. Going to bet that you need to enable the audio out.

[Bill and Gail]

You may have to plug the HDMI cable to the plug marked ARC

[frank4711]

Originally Posted by Bill and Gail

You may have to plug the HDMI cable to the plug marked ARC

X2

[Jaz 1960]

Originally Posted by 007matman

Check the audio output settings in the menu on the Samsung TV. Going to bet that you need to enable the audio out.

I tried the audio output, it didn't work. I'll try the hdmi into the arc. Thanks

[Bill and Gail]

Originally Posted by Jaz 1960

I tried the audio output, it didn't work. I'll try the hdmi into the arc. Thanks

If the radio has an arc setting use it. ARC sends the signal both ways

[Jaz 1960]

There is no arc plug on tv but no worries everything plays through the irv32 except the tv, the samsung has nice a nice built-in speaker.

Originally Posted by Bill and Gail

If the radio has an arc setting use it. ARC sends the signal both ways

[metalsideup]

When I upgraded to a smart-TV I looked at 32" models. I had to buy a Vizio because the Samsung didn't have audio out capability (no audio-out RCA jacks).