2016 Surveyor 265RLDS Sound Bar

[kern]

I would like to see where each device is plugged into on the back of the sound bar and to see if there is another spare input available on the back. Does anyone know how to remove the sound bar from its mount?

[Renderspud]

If it's like ours (240 RBS), the sound bar is velcro'd onto the top of the Shelf. To get hours off I used a couple small plastic pry bars to help separate the velcro strip and then it lifted right up. Hope that helps.

[charisfly]

Originally Posted by kern

I would like to see where each device is plugged into on the back of the sound bar and to see if there is another spare input available on the back. Does anyone know how to remove the sound bar from its mount?

I've got a 2016 285IKDS and it was screwed down with 2 screws from the cabinet below (in my case a fireplace). I had to remove the fireplace first to get access to the two phillips head screws. They just went through the wood into the mounting feet of the sound bar.

I found they didn't wire the TV sound, so I added that using the headphone jack on TV to feed the sound bar. Can't remember for sure, but it seems there was a spare input on back. I also switched the subwoofer switch from "EXT" to "INT" as I think that makes the sound bar have a little more bass (like a frequency cutoff switch, e.g. low pass) since I don't have an external subwoofer.

[kern]

Thanks to all for replying, my post above was the first time I had visited the forum and thought I would give it a try "what a good tool to have for Forest River owners". I have the same setup as charisfy and was able to remove the soundbar once I pulled the fireplace out. Thanks again, maybe one day I'll be able to help others.