26rr / 27rr removable table unfold?

[Jb19]

We have a 27rr and have never used the removable table. Can't figure out how to unfold it. Any advice?.

[RiderBloke]

If it's the same as the one in the 26RR take it into your basement and leave it there and go to Walmart or similar and buy a folding table that will fit under the bed when not needed.
That's how many of us 'use' the FR table.


Sent from my iPhone somewhere on the face of the earth using Tapatalk

[Jb19]

Originally Posted by RiderBloke

If it's the same as the one in the 26RR take it into your basement and leave it there and go to Walmart or similar and buy a folding table that will fit under the bed when not needed.
That's how many of us 'use' the FR table.


Sent from my iPhone somewhere on the face of the earth using Tapatalk

We've never used it in the camper, just want to use it in our computer room at home, but can't figure out how to unfold it.

[RiderBloke]

Originally Posted by Jb19

We've never used it in the camper, just want to use it in our computer room at home, but can't figure out how to unfold it.

Oh. Sorry.







Then there is a little latch on one end. DO NOT TRUST IT! I Velcro a stick to the leg to hold it from folding if I bump it (as it has several times.)




Sent from my iPad using Tapatalk

[Jb19]

Awesome. As soon as I looked at the pictures I realized we were trying to pull the legs straight down instead of to the side. Thanks!

[thunderstruck]

just replaced our folding setup with a set of standard RV table legs

[rockfordroo]

And if you break it, see Post #1 here for my failure, and post #5 for my repair.

http://www.forestriverforums.com/for...re-107776.html

[zuterbru]

I removed the legs, what a pain to put up and down! And very heavy and bulky, took up a lot of space since it did not fold flat. I took the legs off of another fold up table I had. I did have to add more screws to the wood blocks on the sofas the table top goes on. The original legs where designed to hold the weight while folded up, adding a few more 3" wood screws did the trick.

[rockfordroo]

Originally Posted by zuterbru

I removed the legs, what a pain to put up and down! And very heavy and bulky, took up a lot of space since it did not fold flat. I took the legs off of another fold up table I had. I did have to add more screws to the wood blocks on the sofas the table top goes on. The original legs where designed to hold the weight while folded up, adding a few more 3" wood screws did the trick.

Yours must be different than mine. When mine's folded, the legs don't touch the floor. That spring holds them up.