Finished product. Maroon is one if the colors on the outside decals so I used that for some of my creations. Will try the bike in it and go for a test run in a few days. Just a few photos which may help others. The bike's front wheel is right over the rear axle.
Kitchen sink side has slotted bar extending about 8 inches past HF bar. It will be strong enough to to hold any shifting. Screwed hook mounted differently from other end. Holds very tightly.
Attached holed steel to HF bar by enlarging some holes to fit existing bolts. Removed feet from HF bar and put horse stall mat under. Used hook screwed through HF bar (with hook open end cut down a little to lock against the bar.
From the front. The bike is deliberately off center to make access to kitchen easier and hopefully that side seat can be left down with the bike in. Long carpet is usually in the center between the two seats. The other carpet rolled up is the same pattern and shaped to fit kitchen area.
From the rear. When traveling I will sit on my box ver the RH wheel well (which carries kitchen appliances mainly) and use our just purchased folding table which you can see on the left. We got it at Goodwill store for $4.99 - it's brand new but needed a little fix. It will be tied to the drop down leaf I have on there against which it is leaning. I will put a chair cushion between them and use that to sit n the box when I eat.
Sent from somewhere on the face of the earth with my iPad using Forest River Forums
Toyota Tundra towing 2016 Grey Wolf 26RR
24 nights camping & 1450 miles so far (August 17)