Isata 3 refrigerator

[kp5692958]

Refrigerator display continuously converts back to 6 0 after being set to 3 or 4 temp. So it is not cooling.

[Reverse_snowbird]

Originally Posted by kp5692958

Refrigerator display continuously converts back to 6 0 after being set to 3 or 4 temp. So it is not cooling.

Is this a new rig under warranty? If so, take it back to the dealer or get approval for someone else to do the repairs ( another repair facility or mobile mechanic.)

[Bama Rambler]

It may help if you told us the make and model of the fridge. But I tend to agree with Reverse_snowbird if it's under warranty, contact the Isata division and find a repair place to look at it.

[kp5692958]

Originally Posted by Reverse_snowbird

Is this a new rig under warranty? If so, take it back to the dealer or get approval for someone else to do the repairs ( another repair facility or mobile mechanic.)

Dometic, 7.0 cubic foot, looking for model number. Looks like we ran out of propane and now even when plugged in, it is not igniting.

[Bama Rambler]

There are a few models that even though you're on shore power, they check to make sure sure LP is available before they start. So if you're on shore power and run out of LP and it tries to switch to LP it shuts down and won't restart until the LP is restored.

Remove both 120 volt and 12 volt power and then reapply them. It should reset and operate normally again.