Tow/Haul button not working

[kenandterry]

Just recently tried the Tow/Haul button and found it not working at all. Should it work with engine running at idle, or do you have to underway as I was when tried?

Anyone know if there is a separate fuse for this feature? I'm not experiencing any failures of anything else with the Ford dash features.

FYI.........2008 Ford chassis on our Georgetown 330TS.

Thanks

[MrJoe]

If this is a standard Ford setup, the Tow/Haul button locks out overdrive. A light should appear on the dash. Nothing else is noticeable.

[Witch Doctor]

Originally Posted by MrJoe

If this is a standard Ford setup, the Tow/Haul button locks out overdrive. A light should appear on the dash. Nothing else is noticeable.

The Tow Haul is the same on the F250, a light shows on the dash and it locks out overdrive. You run at a higher RPM in each gear. Less trans shifting. That is what I found.

[Acableguy06]

Tow/haul does NOT lock out overdrive this this year of vehicles. It just reprograms the shift points. You will eventually get into OD once speeds/rpms are reached.

To the OP as soon as you start the vehicle you should be able to push the tow/haul button and a light should appear on the dash. If no light, the light could be burnt out or the function not working. And you can engage the tow/haul at any time.

[kenandterry]

Does anyone have the fuse layout for the fuse block underneath the driver's feet on the inside firewall for F53 chassis in my motorhome?

I'd like to check if I have a blown fuse for the Tow/Haul because I don't get a light on the dash when I push the Tow/Haul button on my gear selector.