30 WRS Rear Bed

[hogdooz]

We took our 2016 30 WRS out for the 2nd time this last weekend and had guests with us so used the rear bed in the garage. Getting ready to leave we raised the bed to insert the pin locks, but when we tried to lower the bed onto the pins, it's like there is no power to the bed. No sound, no movement, nothing. Is there a common problem with the bed electrical system or can anyone give me a hint on where to start looking? It's under warranty but it's 4 hours to a dealer. I checked the fuse and it is still good. Thanks for any info.

[drittal]

Have you checked for a blown fuse?

[drittal]

I just re-read the post and see the fuse is good. You can check for power at the motor and at switch. Could also check the switch is good with Multimeter.

[hogdooz]

Just found the problem, the lower limit switch had moved out of place from having a screw missing. It all works as normal again. Thanks for the response.

[drittal]

Great news! Happy camping!

I was going to go out and look at my bed to see if there was a limiter or reset but ended up at my fathers to help home put a snorkel on his RZR