Here is an easy mod
I tought of this just before losing the sun last night. Had the 5 minutes left of sunlight to do this simple mod.
I have a 2013 Roo19 with power tongue jack. The top has a cover for the manual crank with a small round bubble level. The bubble level is held in place with three small screws. Under the level is a soft gasket the same diameter as the level.
Take the level off the cap. On top of the cap in the center place a 1/2" rubber washer that is about 1/6" thick. Replace the level with the three screws just to the point of snug.
Level the trailer in both directions with your normal leveling method. Now adjust the tension of the three screws to center the bubble. Viola'!
Now a question. My Roo19 is a 2012-1/2. I understand that the 2013 built models have some LED lamps in some of the fixtures. Would it be possible for anyone to either PM or post the model numbers of the LED lamps? Maybe a picture, too.
Thanks a lot HTTers!
2011 F150 ScrewXLT 5.0
3.55 FlexFuel StdBed TowPkg
2014 Days Camped 20