|
|
09-16-2014, 10:23 PM
|
#1
|
23ss ROOster
Join Date: Jul 2014
Location: Rocky Mountains
Posts: 83
|
Proper closing up and tucking in technique of tent beds on ROO 23ss
I seem to always battle folding in the beds and tent awning on my two ends. Does anyone have a sure fit way or sequence of closing these ends up, not pinching the canvas, etc?
-Greg: Sent from my iPad using Forest River Forums
__________________
2012 23SS ROO
2014 Ford 4x4 F150 XLT 302A, screw, Ecoboost, 3.73, max tow, off road pkg., 36 gal tank, Ruby Red, tailgate step, Linex spray in, Truxedo bed cover, 30% front tint, Viper remote start, 1000 lbs WDH
|
|
|
09-16-2014, 10:52 PM
|
#2
|
Take The Road Less Travld
Join Date: Apr 2013
Location: Cincinnati
Posts: 595
|
I typically start on one side of the door making sure everything is pushed in and then move to the other side doing the same thing. I usually move back once more to the first side of the bed to make sure the canvas stayed in before sliding the door hinge closed.
__________________
"Take The Road Less Traveled"
2020 Cherokee 294BH
2021 Chevy Silverado 2500HD 6.6 Duramax Diesel
I've been an RVer since 2007, Lifetime Camper
Gotta love the Outdoors, Disconnect and Enjoy Nature!
|
|
|
09-16-2014, 11:26 PM
|
#3
|
23ss ROOster
Join Date: Jul 2014
Location: Rocky Mountains
Posts: 83
|
Some additional questions related to proper folding up of canvas bed: Do you use the snaps on the mattress's that snap to the platform? If so, When folded up or only when down? Where Do you have the fold in the mattress? Small portion towards inside of camper or vice versa when folding up? The folding ceiling bar- on top or under mattress before folding up? Thanks for any and all comments and experiences on this subject.
__________________
2012 23SS ROO
2014 Ford 4x4 F150 XLT 302A, screw, Ecoboost, 3.73, max tow, off road pkg., 36 gal tank, Ruby Red, tailgate step, Linex spray in, Truxedo bed cover, 30% front tint, Viper remote start, 1000 lbs WDH
|
|
|
09-17-2014, 12:47 AM
|
#4
|
Senior Member
Join Date: Sep 2013
Location: saint clair shores MI
Posts: 172
|
I have a 233s with 3 bed to close the best way I found is to close up the camper and turn on the roof vent fans it like vacuum packing them then just lift up half way make sure all material is in on each side and close very easy !!
__________________
2014 roo 233S. 2008 saab 97x
|
|
|
09-17-2014, 02:12 AM
|
#5
|
Site Team
Join Date: Jan 2007
Location: Goodyear, Arizona
Posts: 33,556
|
All this should have been shown during your PDI.
Shame on your dealer for not going over this with you.
I also start on one side tucking in the canvas, then moving to the other side.
I can do this by myself.
And the mattress is snapped in when sleeping on it.
But the mattress is secured differently when traveling.
__________________
Dan-Retired California Firefighter/EMT
Shawn-Musician/Entrepreneur/Wine Expert
and Zoe the Wonder Dog(R.I.P.)
2016 PrimeTime TracerAIR 255, pushing a 2014 Ford F150 SCREW XTR 4x4 3.5 Ecoboost w/Max Tow Package
4pt Equal-i-zer WDH and 1828lbs of payload capacity
|
|
|
09-17-2014, 06:21 AM
|
#6
|
Senior Member
Join Date: Aug 2013
Location: Southeast Michigan
Posts: 628
|
We also use the fans to help suck the vinyl away from the edges, works great. During our pdi we were shown to fold the crossbar in the middle before folding the mattress up, then wrapping the strap around the bar at the end of the bar and then snapping at the sides. It does seem to hold it well this way during travel. Some posters have indicated though that 2015s no longer have the snaps or straps.
__________________
2019 Coachmen Freedom Express 281RLDSLE
2018 2500 HD Silverado
Equal-i-zer Hitch E4
|
|
|
09-17-2014, 09:20 AM
|
#7
|
Member
Join Date: Jul 2013
Location: Ottawa, ON
Posts: 83
|
We do it 2 people now also with the fan. DW pulls in the canvas while I close the bed. I check all sides before locking it down. Haven'd had any issues and all 2 beds are closed up in under 5 mins
__________________
2013 F-150 XTR Ecoboost 4x4, 3.73 w/Equalizer
2014 Roo 233s
Nights camped 2014: 28
Nights camped 2013: 17
|
|
|
09-17-2014, 09:36 AM
|
#8
|
23ss ROOster
Join Date: Jul 2014
Location: Rocky Mountains
Posts: 83
|
Any good YouTube videos that demo this?
__________________
2012 23SS ROO
2014 Ford 4x4 F150 XLT 302A, screw, Ecoboost, 3.73, max tow, off road pkg., 36 gal tank, Ruby Red, tailgate step, Linex spray in, Truxedo bed cover, 30% front tint, Viper remote start, 1000 lbs WDH
|
|
|
09-17-2014, 11:06 AM
|
#9
|
Senior Member
Join Date: Aug 2013
Location: Southeast Michigan
Posts: 628
|
Quote:
Originally Posted by Wags2237
Any good YouTube videos that demo this?
|
Funny, I was thinking about doing just this! I was outside sanitizing the water system in the roo for a trip next week and was thinking a video showing how to store and close the bunk ends would be nice. I may try to get that done today if I get a chance. Great idea!
__________________
2019 Coachmen Freedom Express 281RLDSLE
2018 2500 HD Silverado
Equal-i-zer Hitch E4
|
|
|
09-17-2014, 11:26 AM
|
#10
|
Senior Member
Join Date: Mar 2013
Posts: 432
|
I do not use the straps at all. I actually fold the matress up and prop it on the lip of the door opening. Then turn the fan on and the canvass mostly sucks itself in if the entry door is closed. Normally do this by myself.
__________________
2020 GMC Denali 4X4 2500HD Duramax
2018 Work & Play 25WAB
|
|
|
09-17-2014, 11:34 AM
|
#11
|
23ss ROOster
Join Date: Jul 2014
Location: Rocky Mountains
Posts: 83
|
Quote:
Originally Posted by Jimandchris
Funny, I was thinking about doing just this! I was outside sanitizing the water system in the roo for a trip next week and was thinking a video showing how to store and close the bunk ends would be nice. I may try to get that done today if I get a chance. Great idea!
|
Would appreciate it.
__________________
2012 23SS ROO
2014 Ford 4x4 F150 XLT 302A, screw, Ecoboost, 3.73, max tow, off road pkg., 36 gal tank, Ruby Red, tailgate step, Linex spray in, Truxedo bed cover, 30% front tint, Viper remote start, 1000 lbs WDH
|
|
|
09-17-2014, 05:06 PM
|
#12
|
Senior Member
Join Date: Feb 2013
Location: Orland Park, IL
Posts: 471
|
This is an older video but still interesting to see the process:
__________________
2015 Rockwood Roo 23IKSS
2015 GMC Sierra 1500
|
|
|
09-17-2014, 07:06 PM
|
#13
|
Senior Member
Join Date: Sep 2012
Posts: 179
|
Quote:
Originally Posted by dado39
I have a 233s with 3 bed to close the best way I found is to close up the camper and turn on the roof vent fans it like vacuum packing them then just lift up half way make sure all material is in on each side and close very easy !!
|
2x
Sent from my iPhone using Forest River Forums
|
|
|
09-17-2014, 07:32 PM
|
#14
|
Senior Member
Join Date: Aug 2013
Location: Southeast Michigan
Posts: 628
|
Quote:
Originally Posted by Wags2237
Would appreciate it.
|
Here you go, it's not a very good video, shot it really quick this afternoon. This is for the newer attached style bunk ends.
http://youtu.be/U1cidV3rSiY
__________________
2019 Coachmen Freedom Express 281RLDSLE
2018 2500 HD Silverado
Equal-i-zer Hitch E4
|
|
|
09-17-2014, 08:31 PM
|
#15
|
Senior Member
Join Date: Sep 2012
Posts: 179
|
Like!!!
Sent from my iPhone using Forest River Forums
|
|
|
09-17-2014, 08:40 PM
|
#16
|
Senior Member
Join Date: Aug 2013
Location: Southeast Michigan
Posts: 628
|
Quote:
Originally Posted by Nccamper
Like!!!
Sent from my iPhone using Forest River Forums
|
Thanks! It was slapped together rather quickly, not one of my better videos, that's for sure.
__________________
2019 Coachmen Freedom Express 281RLDSLE
2018 2500 HD Silverado
Equal-i-zer Hitch E4
|
|
|
09-17-2014, 09:02 PM
|
#17
|
Senior Member
Join Date: Sep 2012
Posts: 179
|
The fans are the way to go. I have used this method the last three times camping. Works great. You did a good job on the video!!
Sent from my iPhone using Forest River Forums
|
|
|
09-17-2014, 09:49 PM
|
#18
|
Member
Join Date: Sep 2014
Location: Cabot,Ar.
Posts: 67
|
New to the forum, picked up a 2015 Roo 21SS today and this post about folding up the ends is where I have a problem. First off we have had 4 Pop-ups and a class C.
In watching the video that one of the members did , when he put up the end it just "fell into place" , when I put up the ends up with the dealer we had to "pushed" really hard to close them up.....Didn't feel right but it was getting late and we wanted to get home. From what I have seen the mattress could be where our problem is, do you center it, then tuck in the ends with the fans on? And that does it? Tomorrow we will play with it.....Also what was the "tube" he put on the top of the end?
Anyway, we really like the unit and all it offers..Last thing, what is the process for cleaning the end material? just flatten it out and hose it? Or what??
Thanks,
Jim
|
|
|
09-17-2014, 10:36 PM
|
#19
|
Senior Member
Join Date: Aug 2013
Location: Southeast Michigan
Posts: 628
|
Hi, our 2014 mattresses have two large straps with snaps that keep them in place so that when you fold up the end, the mattress stays put, otherwise it falls down and then its difficult to close the end. There should not be any resistance when closing up the bunk ends, if so something isn't quite right. A few posters have mentioned the mattresses no longer have any straps on 2015 models. The two large straps have two snaps each and are located out at the corners at the bunk end edges. Something has to keep it in place from sliding down when closing the bunk end.
We use a good vinyl cleaner for the ends.
__________________
2019 Coachmen Freedom Express 281RLDSLE
2018 2500 HD Silverado
Equal-i-zer Hitch E4
|
|
|
09-17-2014, 10:38 PM
|
#20
|
Senior Member
Join Date: Sep 2013
Location: saint clair shores MI
Posts: 172
|
Nice video a little more info on how to do the PVC cap would be great
__________________
2014 roo 233S. 2008 saab 97x
|
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|