Originally Posted by strat56
My black tank usually fills up faster than my galley tank so it needs to be dumped more often.
I bought one of those twist on blade valves because my galley tank outlet is under the LR slide and I open the valve on the trailer and use the twist on at the wye to dump the galley tank when it needs it and I could just add another twist on valve at the wye but I'm trying to simplify set up and break down and thought you might have found something else.
If you want to simplify setup and breakdown, could you just leave the blade valves always attached to the wye? Just disconnect the hoses and let it be like that for storage between trips.
Originally Posted by leefl
So you have two full sewer hose sets and connect them together at the dump end ?
So far I've just been disconnecting from one hookup and moving to another.
Our 5er has 3 connections: -
One for the front bathroom (black and gray tanks/valves on one connection)
One for the kitchen gray tank
One for the rear bathroom (one tank/valve/connection for toilet and basin).
Yes, I carry four 10' sections of hose (with those bayonet/peg fittings on the ends).
I have 2 sewer connections. Yours is the first that I have heard with 3. I think I would see about plumbing your kitchen outlet into one of the other ones.
We have been setting up for 2 weeks and I'm much too lazy to move the hose. It doesn't help that my rear connector is a pita to get to- deep under one of the slides. It's a hassle to even dump the tank much less to hookup the sewer hoses. I like to do it before we deploy slides.