What did you do to your camper today?

[YYCBrad]

Thanks OC!

[Witch Doctor]

Originally Posted by YYCBrad

Thanks OC!Attachment 172290

Why isn't the top pole powder coated? I need to get mine done, what was the reason? OC thinks mine that are polished alum. Would look good with my new black awning and no reason to get them painted.

[YYCBrad]

Double post

[YYCBrad]

Originally Posted by Witch Doctor

Why isn't the top pole powder coated? I need to get mine done, what was the reason? OC thinks mine that are polished alum. Would look good with my new black awning and no reason to get them painted.

They are the fiber glass painters poles from Lowe's. Painted them black. Didn't want to gum up the inner pole/holes by painting them.

[PineRock]

Originally Posted by Wisconsin-1

I am looking for help, I have a 2019 Roo 233S. I want to put a bottle opener some where outside on the camper but with it being fiberglass and the bottom skirting below I am not sure it would go. I was thinking maybe right inside the door? Where else has someone put theirs?

[Bnrc73]

I'd buy an opener with a magnet and set it on the hitch. That way you can take it to your chair by the fire and be set for the night.

[Boomerweps]

Not TO my TT, but FOR my TT.
I took a pickaxe to a 6' section of my drive to knock loose stone, gravel and dirt on a humped up section that goes down to the main highway. Trying to make sure my sewer tank outlets don't drag. Then I raked it a little flatter.
Trying to get ahold of a guy we know with a large tractor with backhoe & dozer blade to really level the angle of our driveway.
Yesterday I bought some plastic organizer bins from Walmart's office supply section for in the cabinets. Shaped like a flattened out rectangular waste basket that humps up in the back. Four fit perfect across my cabinet over the sink.

[Buck1032]

Making a backing board to mount the bedroom TV. Bought a fully articulating mount at Harbor freight. The mount weights two or three times more than the El cheapo TV that was in living room. The notch on the bottom left corner is to give the DVD player a little extra room behind for cables.

[SailorSam20500]

Fixed my switch panel and thermostat. Of 10 screws holding them on, 1 was in more than the "plywood" wall. Glued some 1/2" thick wood strips to the backside of the wall before reinstalling. That should hold them in place.

[Witch Doctor]

This can only happen to me first. Went to hook up this morning and I can't raise my front landing gear, either in auto or manual. The pump is working the rear will go up or down and you can hear it pump with using the front controls. The switch broke which only controls the front legs, I ordered a new one and replaced it wire for wire. It will run the pump but nothing moves. I disconnected it and still the panel works but the pump will come on and no movement then it will trip out from getting hot. I have to get the legs up. My theory is to remove the return line after jacking it up and hooked up then wire them to hold both legs up. Take it to the dealer for trade in and let them deal with it. I will take a hit and be in there mercy. I tried to change the valves and used a drill on the motor and still nothing. ( per the manual) They didn't budge at all. I feel stupid I'm missing something, I have a call into Lippert 24/7 emergency tech support since 8:00am this morning never a call yet back. Do you think if I jack it up and hook up then releave the pressure and wire the pads up I can get to SC 320 miles away to the dealer where I'm trading it in? Thanks for members advice.. Also there is a manifold with 4 lines going to it The supply line is connected at the end with no valve the two 2 valves on it runs to the back jacks not the front that are on that manifold. Hope that helps someone. I did open both valve by passes and still nothing, weird problem to me. I was looking forward to Monday to pick up my new RV, that will not happen now maybe Tuesday or Wed. if lucky.

[dblr]

How is your hydraulic fluid level?

[Witch Doctor]

It is full and the rear jacks work, battery reads 13.6 plugged in on the screen of the level up .03 only on level.

Originally Posted by dblr

How is your hydraulic fluid level?

[Witch Doctor]

So it not either of them but thanks for your reply

[Witch Doctor]

Still waiting for Lippert on that 24/ 7 hot emergency line, what a joke.

[Witch Doctor]

Wondering, if I take the supply line off the first jack and put the end in the tank and check to see if any fluid is coming out, will that work? Both jacks are ran by one supply line? Both jacks can't be out, something is stopping that fluid? Any thoughts?

[Witch Doctor]

Don't know if there is a push bearing that comes into play, so that might tell me nothing. DAM lippert.

[Witch Doctor]

There is also no kinks, unless it collapsed inside but no leaks or distortion on that line only like 2' long.

[Witch Doctor]

I guess I can go to Napa and have a new one made in the AM but still a very weird problem. Best maybe just get it hooked up and raise the pads and wire them up and get to the dealer, very frustrating

[Mch5jdm]

Painted the hitch white to make it easier to see on the backup camera.

[pbandrb]

Originally Posted by Mch5jdm

Painted the hitch white to make it easier to see on the backup camera. Attachment 172625

Good idea, I tried a strip of white duct tape on hitch and ball shank it did not help much. I struggle with when is the ball under the hitch