|
|
09-30-2015, 05:36 PM
|
#5101
|
Always Learning
Join Date: Nov 2011
Location: Four Corners, FL
Posts: 21,891
|
Quote:
Originally Posted by OldCoot
Had it done in FL in Jan for $100 also and they did the same thing plus the truck. Will have the same crew do it in Jan16 also.
|
If you don't mind, shoot me that contact information please. I'll be back in Florida in February.
|
|
|
09-30-2015, 05:46 PM
|
#5102
|
Senior Member
Join Date: Jun 2011
Location: Hattiesburg, MS
Posts: 1,658
|
Quote:
Originally Posted by ependydad
Jeez, send him my way! I've yet to find an outfit to do the same for less then $10/foot.
|
Bring it here and I'll do it for $9.50 a foot!
__________________
2012 Flagstaff V Lite 30 WRLTS
2005 Dodge Ram 2500 5.7 Mag Hemi 3.72 Rearaxle
Nights camped 2015 = 23
Nights camped 2016 = 25
Nights camped 2017 = 13
Nights camped 2018 = 3
|
|
|
09-30-2015, 05:51 PM
|
#5103
|
Mod free 5er
Join Date: Mar 2008
Location: Concord, NC
Posts: 24,702
|
Quote:
Originally Posted by ependydad
If you don't mind, shoot me that contact information please. I'll be back in Florida in February.
|
The name of the outfit is in the trailer. Remind me tomorrow or around Thanksgiving. I'm too lazy to go out to the camper tonight.
|
|
|
09-30-2015, 05:52 PM
|
#5104
|
Always Learning
Join Date: Nov 2011
Location: Four Corners, FL
Posts: 21,891
|
Quote:
Originally Posted by Timex
Bring it here and I'll do it for $9.50 a foot!
|
You know, I haven't been to Mississippi yet... Be careful what you ask for!
|
|
|
09-30-2015, 05:57 PM
|
#5105
|
Always Learning
Join Date: Nov 2011
Location: Four Corners, FL
Posts: 21,891
|
Quote:
Originally Posted by OldCoot
The name of the outfit is in the trailer. Remind me tomorrow or around Thanksgiving. I'm too lazy to go out to the camper tonight.
|
Truth be told, I'll likely forget until I'm in Florida.
This thing needs washed horribly. Just over 4,200 miles towing it since we left in June... it's EWW.
|
|
|
09-30-2015, 06:47 PM
|
#5106
|
Left Coast
Join Date: Dec 2014
Location: vancouver,washington
Posts: 15,649
|
$9.49 out here.
|
|
|
09-30-2015, 06:53 PM
|
#5107
|
Always Learning
Join Date: Nov 2011
Location: Four Corners, FL
Posts: 21,891
|
Quote:
Originally Posted by bob caldwell
$9.49 out here.
|
IT'S A PRICE WAR! YES! I love being fought over.
|
|
|
09-30-2015, 06:58 PM
|
#5108
|
Senior Member
Join Date: Jul 2015
Location: Central Florida
Posts: 454
|
Quote:
Originally Posted by ependydad
If you don't mind, shoot me that contact information please. I'll be back in Florida in February.
|
I'd be interested too, if it's relatively local to me. Whereabouts in FL was this ?
|
|
|
09-30-2015, 07:06 PM
|
#5109
|
Member
Join Date: Sep 2015
Location: Meriden,Ct & Palmetto, Fl
Posts: 36
|
Light for switch panel on 2012 Silverback 29RE
I got this light from amazon.
OxyLED® T-01 DIY Stick-on Anywhere 4-LED Touch Tap Light Push Light,
Put it on the perpendicular wall next to switch panel. Now I don't have to find a light to see the switches at night.
I was surprised that the panel isn't back lit. I can't seem to remember which switch is which in the dark.
__________________
Tim fm Ct
2012 Silverback 29RE
|
|
|
09-30-2015, 07:20 PM
|
#5110
|
Senior Member
Join Date: Sep 2013
Location: Texas
Posts: 1,183
|
Quote:
Originally Posted by OldCoot
Had the camper washed, waxed, awning cleaned for $100 today. Man did an excellent job.
|
I would jump on that price. $10.00 a foot seems to be the going price around here. I have been working waxing it myself for the past two weeks at a couple of hours a day. I quit when it gets too hot for me, we have been in the 90's since I started this job. I said wax but its a polymer sealer polish, protects from UV's. I'll finish up tomorrow. Can't figure out why some pictures I upload show up 90ş off.
__________________
Joe & Beverly
2014 Ram 2500 CTD, CC, SB
2014 8289WS lifted
|
|
|
09-30-2015, 07:22 PM
|
#5111
|
Senior Member
Join Date: Oct 2014
Posts: 981
|
Quote:
Originally Posted by Ditchdigger
Mine is a 2011 306wp. They call it 32' but measures 36'. The only other one I have seen was a 39' and it had three axles too. What dose yours have?
|
Ours measures 37' loa but only 2 axles. Ive never seen ANY other wolf pack fw toy haulers. One tt hauler this summer,but it was an older one.They must not be very popular!
|
|
|
09-30-2015, 07:31 PM
|
#5112
|
Senior Member
Join Date: Sep 2015
Posts: 3,464
|
Quote:
Originally Posted by OldCoot
Had the camper washed, waxed, awning cleaned for $100 today. Man did an excellent job.
|
That's criminal...👍🏻
I sure wouldn't do it for a hundred!
2008 F350 CCSB V10
2016 Sabre 36QBOK
__________________
2017 Dynamax Isata 4
|
|
|
09-30-2015, 07:34 PM
|
#5113
|
Left Coast
Join Date: Dec 2014
Location: vancouver,washington
Posts: 15,649
|
Pressure washers make it easy, if you know how to manage certain areas
|
|
|
09-30-2015, 09:15 PM
|
#5114
|
Senior Member
Join Date: Oct 2014
Location: Where ever the trailer is parked
Posts: 112
|
Quote:
Originally Posted by trbomax
Ours measures 37' loa but only 2 axles. I've never seen ANY other wolf pack fw toy haulers. One tt hauler this summer,but it was an older one.They must not be very popular!
|
I have not seen very many Wolf Pack's either. I don't think they make many of them. I have had mine for 2yrs, I bought it after I lost everything to a wild fire in May of 2013, and my wife left too. Had to split the little money we got from insurance, then I payed the wife for her half of the property(20 acres) All I had was enough to buy the trailer, and a 05 chevy one ton, and it gave me a lot of trouble.
|
|
|
09-30-2015, 09:54 PM
|
#5115
|
Senior Member
Join Date: Oct 2013
Posts: 1,443
|
Our trailer has a small end table with an ugly lamp, mounted on it, that sits between our 2 swivel rocker. 1st table is too short, 2nd it gets in the way of our swivel rockers, 3rd ugly lamp has to go.
Made new base for the table that makes it sit sideways and closer to the wall plus raised it 2 inches. By doing this cured 1 and 2 no longer interferes with swivel of chair. Took ugly light off table top but left a hole in the table so made a plug for the hole and put an oak laminate on top to match wood. Wife Inspected got the Good Housewife seal of approval. Just need to find a new light we both like.
__________________
Think about things before you do them make life easier not harder.
|
|
|
09-30-2015, 10:29 PM
|
#5116
|
Left Coast
Join Date: Dec 2014
Location: vancouver,washington
Posts: 15,649
|
Quote:
Originally Posted by mark0224
Our trailer has a small end table with an ugly lamp, mounted on it, that sits between our 2 swivel rocker. 1st table is too short, 2nd it gets in the way of our swivel rockers, 3rd ugly lamp has to go.
Made new base for the table that makes it sit sideways and closer to the wall plus raised it 2 inches. By doing this cured 1 and 2 no longer interferes with swivel of chair. Took ugly light off table top but left a hole in the table so made a plug for the hole and put an oak laminate on top to match wood. Wife Inspected got the Good Housewife seal of approval. Just need to find a new light we both like.
|
Same problem you had...I built a drawer section to add to bottom of table, raising the top up to where you don't have to bend over to use it.
|
|
|
10-01-2015, 10:27 AM
|
#5117
|
Senior Member
Join Date: Oct 2013
Posts: 1,443
|
Quote:
Originally Posted by mark0224
Our trailer has a small end table with an ugly lamp, mounted on it, that sits between our 2 swivel rocker. 1st table is too short, 2nd it gets in the way of our swivel rockers, 3rd ugly lamp has to go.
Made new base for the table that makes it sit sideways and closer to the wall plus raised it 2 inches. By doing this cured 1 and 2 no longer interferes with swivel of chair. Took ugly light off table top but left a hole in the table so made a plug for the hole and put an oak laminate on top to match wood. Wife Inspected got the Good Housewife seal of approval. Just need to find a new light we both like.
|
Veneered the top today to cover the hole, from the light, you can see from the underside. New legs shown with old ones, old can be put back just screwed on. This made it so it's right against the wall. First time to veneer .
__________________
Think about things before you do them make life easier not harder.
|
|
|
10-01-2015, 10:59 AM
|
#5118
|
Always Learning
Join Date: Nov 2011
Location: Four Corners, FL
Posts: 21,891
|
Quote:
Originally Posted by leefl
I'd be interested too, if it's relatively local to me. Whereabouts in FL was this ?
|
I believe it would be Clermont, FL.
__________________
Officially a SOB with a 2022 Jayco Precept 36C
Checkout my site for RVing tips, tricks, and info | Was a Fulltime Family for 5 years, now we're part-timing on long trips
|
|
|
10-01-2015, 12:07 PM
|
#5119
|
Senior Member
Join Date: Jul 2015
Location: Central Florida
Posts: 454
|
Quote:
Originally Posted by ependydad
I believe it would be Clermont, FL.
|
About an hour away from me. But I do pass near Clermont sometimes if heading north (and going to I-75 via the turnpike), so it's a possibility if they're good and cheap
__________________
2015 Rockwood Signature UltraLite 8281WS
2016 Ford F-250 Lariat CrewCab, 4x4, 6.2L V8
|
|
|
10-01-2015, 01:24 PM
|
#5120
|
Mod free 5er
Join Date: Mar 2008
Location: Concord, NC
Posts: 24,702
|
Quote:
Originally Posted by ependydad
If you don't mind, shoot me that contact information please. I'll be back in Florida in February.
|
He was at Fawn Ridge in Davenport, FL, 13 miles south of TT Orlando on US Hwy 27.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|