Thanks for Welcome

[Panama Jim]

Frankly, my wife Loree and I were thrilled to get our new Wildwood 171RBXL. We want to drive across country, from Oklahoma through Texas, down to California, and then up to Oregon to visit relatives. We are really excited about the trip, and the 171 is exactly what we were looking for, and can be towed easily with my F-150 XLT.

Now all we need to do is figure out how to mount the 32" tv I bought. Anyone know if I can just screw the wallmount to the wallboard labelled "TV MOUNT" with four 1" long #10 wood screws?

Anyway, looks like a very well made product!

Sincerely, Jim Darrough

[SeaDog]

welcome to the forum its a great place to get your questions answered. If it labeled TV Mount you should be able to mount your tv without any problems. 1 or 1.25 inch screws is what I would use

[cavie]

Originally Posted by Panama Jim

Frankly, my wife Loree and I were thrilled to get our new Wildwood 171RBXL. We want to drive across country, from Oklahoma through Texas, down to California, and then up to Oregon to visit relatives. We are really excited about the trip, and the 171 is exactly what we were looking for, and can be towed easily with my F-150 XLT.

Now all we need to do is figure out how to mount the 32" tv I bought. Anyone know if I can just screw the wallmount to the wallboard labelled "TV MOUNT" with four 1" long #10 wood screws?

Anyway, looks like a very well made product!

Sincerely, Jim Darrough

Just be sure the mount board is in fact behind that label.

[myxkp]

Mounted my telly with 3/4 inch screws as recommended. All good.
Wall was labeled "mount tv here " but stud finder showed plywood backing was centered several inches right of label. If you don't have a stud finder you can test the area with a finishing nail.

[geeman53]

Welcome from SW Ohio, enjoy your Wildwood !