2006 Forester 31'class C

[Detroitdeb]

Looking for advice on how to add HDMI to a
Concertone Rv2006D.trying to hookup Samsung tv to system.

[Tombsy]

Not sure what the board is your showing but could you use an HDMI to rca converter?
http://HDMI to Audio Video Converter..._6fhpDbXR5FZD9

[Detroitdeb]

On the other side is red ,white, yellow plugs .

[Detroitdeb]

Would like to upgrade this wall plate

[Tombsy]

I think maybe I would unplug the wall plate from the main unit and replace it with an HDMI to rca adapter similar to the link above, there are lots of different options for wall plates you could use with the HDMI adapter.
https://www.homedepot.com/s/hdmi%252...suggest&NCNI-5

[Detroitdeb]

Needs a six pin plug adapter on it like the one in the picture .

[rockfordroo]

Your rig is pretty old, HDMI-wise. Concertone doesn't seem to have anything on their website. So I'm guessing you're not going to find a plug-and-play solution.

If it were me, I'd get the HDMI to video converter mentioned above, cut off the RCA plugs, then cut off the connector in your pic and solder your existing wires to the cut off RCA wires. Better yet, if you can get the converter box open, unsolder the entire RCA pigtail and solder your existing wires in their place.

THEN if you want a wall outlet, you would get a short piece of HDMI-to-HDMI cable to connect the wall plate to the converter box behind the wall.

[Tombsy]

Ok I think I’m starting to understand now so the Concertone has a hardwired breakout board for rca’s? If so a possible no solder option might be three of these to replace the board then connect the rca to hdmi adapter.

https://elmwoodelectronics.ca/produc...QaAuDkEALw_wcB

[Detroitdeb]

Fixed thank you

[rockfordroo]

Originally Posted by Detroitdeb

Fixed thank you

Can you please report the fix, so others will know. Thanks.