Originally Posted by tlambert
Kaadk could you do a "how to" on the light box switch that the seven pin plug connected into.
I always used a fused link plugged into the 2 connectors to make the lights come on but I like this better.
Not much to do a "How To" on. It's the same thing as your fused link. Just made easier with a harness.
1) Go pick up a 7-pin harness from your local walmart, autozone, canadian tire, etc...
2) Go get a waterproof box.
3) Put the 7 pin harness in the box.
4) Wire the fused link to the harness across the same pins you do today (3 & 4)
5) Put a switch along the link so you can turn them on/off.
Next time I pull the TT out of storage I'll snap a pic of the inside of the box so you can see it's just a wire from harness to fuse to switch back to harness.