Help digi thermo replacement
Pleaseexcuse me for any stupidity if I overlooked something. I spent the time to read all the post i could find on this and printed the instructions. I have a 2012 rockwood 8317rkss, It has a coleman mach analog. I bought the Walmart Hunter digi thermo, I installed the switch for high and low fan.
On the wiring schematic I printed it has red wire not used, yellow-cool, orange-low fan, blue-high fan, white-furance, and black as the ground.. When I removed the thermo from the wall the wired didnt match up in color, So i found the schematic for the thermo that was installed in the TT. instead of orange it was gray and instead of blue it was green..
I have tripled checked my wiring and can not get the ac or furnace to come on. Any ideas what could be wrong?
thanks in advance for any help
|