|
11-02-2015, 04:47 PM
|
#1
|
Member
Join Date: Jul 2015
Posts: 77
|
How would you permanently attach.....
a 3/4" x 4" x 5' board to a wall? These RV walls are fairly thin so conventional household fastners won't work...debating using construction glue but don't know how well it'll stick to the wall paper....suggestions...thanks
__________________
Flagstaff Classic 8321 KBS Ram 3500 Dually
|
|
|
11-02-2015, 04:52 PM
|
#2
|
Senior Member
Join Date: Oct 2014
Posts: 981
|
You find the studs and run the screws into them. They should be 16"oc,but for some strange reason mine are 14"oc.
|
|
|
11-02-2015, 04:55 PM
|
#3
|
Senior Member
Join Date: Sep 2013
Location: Idaho
Posts: 9,839
|
Coat rack?
These are good up to 5 pounds each, we hang towels off them.
http://www.amazon.com/Command-Timele...stick+on+hooks
__________________
2016 F350 6.7L LB CC Reese 28K 2014 Chaparral Lite 266sab
"Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety." 2014 19 days camping 2015 17 days camping201620 days camping
|
|
|
11-03-2015, 06:05 AM
|
#4
|
Senior Member
Join Date: Jun 2015
Posts: 627
|
If you can't find one of the studs, use a hollow wall anchor.
I like the hollow wall anchors over the molly bolts. Your wall is very thin so make sure you buy the ones for a thin wall and not a thick wall.
You can see how these work in the photo.
Pre-drill a hole that is slightly small, press the anchor in and then tighten the screw to expand the feet grippers.
__________________
2001 Coachmen Mirada (Ford F53 6.8L V10) - Toad 2003 Saturn Vue
It won't do MACH 2, but I can get a sandwich and take a pee.
|
|
|
11-03-2015, 06:22 AM
|
#5
|
Senior Member
Join Date: Sep 2012
Location: Virginia
Posts: 9,934
|
Just curious a 5 ft long board what are you planning on using it for ?????
__________________
2005 Dodge 3500 Cummins
2017 Wildwood Lodge 4092 BFL
1966 Mustang GT
1986 Mustang SVO
Lillie Spoiled Rotten Boxer Mix
|
|
|
11-03-2015, 06:57 AM
|
#6
|
Senior Member
Join Date: Jul 2015
Posts: 7,053
|
Horizontally or vertically? Must it be in a specific location (it matters more if your installation is vertical)?
Bruce
__________________
2016 Rockwood Windjammer 3029W Diamond Edition
2015 Chevy 3500HD LTZ 6.0 Crew Cab 4x4 Long Bed 4.10:1 SRW
|
|
|
11-03-2015, 11:46 AM
|
#7
|
Member
Join Date: Jul 2015
Posts: 77
|
Thanks for the replies...looks like the Molly's are the way to go......no comments back on using construction glue.....
Couldn't really describe what I wanted to do so tried my hand with "SketchUp" to illustrate the task. Our pantry have these shelves (actually 3 ea) with no way to keep things from falling off during travel...at the time we were rushed and using Command Hooks....placed a few on the walls and under the shelves and then stretched a cargo net over all the shelving...got it at HF for $25...worked really well but when applying pressure, the hooks started popping off....we therefore want to attach a sturdier hook(s) which is why i need to attach the boards.
I realize there are other ways to secure the shelf items but we really liked the net...with the amount of elasticity you can actually pull items thru the net if needed without taking the net down plus it doesn't take up hardly any storage space.
__________________
Flagstaff Classic 8321 KBS Ram 3500 Dually
|
|
|
11-03-2015, 11:52 AM
|
#8
|
Mod free 5er
Join Date: Mar 2008
Location: Concord, NC
Posts: 24,702
|
Quote:
Originally Posted by waiter21
If you can't find one of the studs, use a hollow wall anchor.
I like the hollow wall anchors over the molly bolts. Your wall is very thin so make sure you buy the ones for a thin wall and not a thick wall.
You can see how these work in the photo.
Pre-drill a hole that is slightly small, press the anchor in and then tighten the screw to expand the feet grippers.
|
Mollys are too long for the walls. The walls are not thick enough to take the length of the molly even if they are for thin walls.
Better to use threaded inserts.
|
|
|
11-03-2015, 11:55 AM
|
#9
|
Senior Member
Join Date: Oct 2014
Posts: 981
|
I didnt think moly's would work on cardboard...................
|
|
|
11-03-2015, 11:57 AM
|
#10
|
Member
Join Date: Jul 2015
Posts: 77
|
Thats why I was thinking of some sort of adhesive....kinda spread the load around....
__________________
Flagstaff Classic 8321 KBS Ram 3500 Dually
|
|
|
11-03-2015, 12:58 PM
|
#11
|
Left Coast
Join Date: Dec 2014
Location: vancouver,washington
Posts: 15,649
|
Camco makes expanding (length wise) gismos to retain things in fridge....I use 'em in pantry to keep stuff from opening door
|
|
|
11-03-2015, 01:09 PM
|
#12
|
Senior Member
Join Date: Nov 2015
Posts: 672
|
Why not screw your hooks directly into the bottom side of the shelf above each. Small cup hooks should be more than adequate. Loading would be more in shear also.
Not penetrating the walls is a much better move.
|
|
|
11-03-2015, 01:25 PM
|
#13
|
Senior Member
Join Date: Dec 2014
Location: oakdale, ca
Posts: 292
|
You could use adhesive if you cant find the studs. I would use construction grade liquid nails. It will not let go of anything. I have seen 2x6s glued together with this and then have them hold 300lb equipment on sites. It would pull your paneling off before giving way.
|
|
|
11-03-2015, 01:48 PM
|
#14
|
Member
Join Date: Jul 2015
Posts: 77
|
Quote:
Why not screw your hooks directly into the bottom side of the shelf above each
|
Thats exactly what I did with the Command hooks and what I'll do with this setup but where would the hooks go to hold back the stuff on the uppermost shelf?
__________________
Flagstaff Classic 8321 KBS Ram 3500 Dually
|
|
|
12-06-2015, 09:26 AM
|
#15
|
Member
Join Date: Oct 2011
Posts: 80
|
If you NEVER want to remove the boards again use any pro quality construction adhesive
I use PL 9000 never fails
|
|
|
12-10-2015, 04:16 AM
|
#16
|
Senior Member
Join Date: Mar 2012
Location: SC
Posts: 251
|
i used construction glue when I mounted the coat rack in the garage of our XLR and has worked great. I just put some one the back and then put a few short pin/nails in them to hold until the adhesive dried and then screwed the coat rack on with screws long enough to go through the maple board and in to the wall.
|
|
|
12-10-2015, 12:24 PM
|
#17
|
Senior Member
Join Date: Sep 2015
Location: Tennessee
Posts: 260
|
The problem with const. adhesive is you are applying it to a wall covering applied to thin plywood. The wall covering can and will peel off. Look for an expanding anchor at hardware dept.
|
|
|
12-11-2015, 09:10 AM
|
#18
|
Member
Join Date: Mar 2014
Location: Yukon, OK
Posts: 39
|
I have used these pop toggles both at home and in my travel trailer. I like that it doesn't depend upon crushing the inside against the wall in order to be ready for the screw.
I use them mostly to hang wall track for shelving. In the TT I put one in every mounting hole.
http://wedo.hillmangroup.com/viewite...-toggle-trade-
__________________
2014 Coachmen Catalina 273DBS
50th Anniversary model
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|