Installing remote dump valve
Bad design for the kitchen gray tank dump valve. I know Nigel's D/W and mine are destroying their fingernails having to crawl under the 8285WS to open the gray tank dump valve. (At least that is what Nigel said). So I thought it over and came up with a easy way to open the dump valve.
For you TT & fifth wheel owners here is a blow by blow fix if you have two gray tanks and one has the dump valve located under the BUMP-OUT.
I order the remote assembly by VALTERRA # TC-372, 3" assembly off Amazon.com (About $68.00)
#1 Picture is information
#2 Picture is MODEL & size
#3 Picture is contents, valve, new seals, remote cable, nuts & bolts,
mounting bracket,
#4 Picture is detailed instructions
#5 Removal of existing dump valve (Held in place by four bolts)
MAKE SURE YOU DRAIN THE TANK BEFORE REMOVING VALVE !
#6 New plastic information plates.
#7 New dump valve installed, I lubricated the seals with lithium grease
before installing valve.
#8 New valve remote cable bracket installed just behind the bump-out.
The bracket comes as one straight piece with several holes and large
hole for the cable housing. I had 2 1/2" cut from the bracket and
welded to the frame mount portion (bracket is made of aluminum)
I used stainless self tapping screws 2" long to mount to the frame
of the 8285WS. There is a 3/4" thick by 2" wide piece of wood
mounted to the bottom of the frame that all the siding is mounted
to that you have to drill through to mount the bracket.
#9 Is the finished job of installing the remote dump valve for the kitchen
gray tank.
#10 Is my "ROCKY" ready to go on the next venture!
__________________
Sid & HRH MISSY, SHIH TZU
2019 WILDCAT 28 SGX
2014 F-250 KING RANCH PS 6.7L/SWD/6R140/BFT
TST Truck System Technologies TM-507SE
DAYS CAMPED 2023 69 DAYS
[SIGPIC][/SI[SIGPIC]
|