Wanted to post a few pictures to show that it is very easy to install a LCD TV mounted to the wall near hookups as designed on my new 2015 Wildwood X Lite 261BHXL.
I looked everywhere online but never found photos or brands of mounts and hardware etc so wanted to share to help others.
Purchased a 24" Visio LCD, full motion mount and component audio/video cables.
Found the "stud" in middle of wall and began to install mount.
Realized the lag bolts provided were an inch too long and would have gone through the wall to the bunk beds. (and recommended for RVs)
So I purchased 2 x 1 1/2" 5/16 lag bolts matching the ones that came with the mount just shorter and it did the trick.
Pre drilled and installed , went very smooth until I got to test out the DVD player.
Turns out the video cable was not plugged in at all and left pre wired behind the unit. I needed a square bit screw driver to pull the unit out and plugged into Video Out and all worked! (this is not uncommon as I read someone else took the trailer back to dealer to get fixed )
Anyways works great attached are some photos of parts and completed product.