|
|
04-13-2011, 01:52 PM
|
#1
|
Junior Member
Join Date: Mar 2011
Posts: 17
|
Resistor for cutting 12v in half
Is there a resistor that can be used to cut 12v in half?
I'm wanting to dim a couple of bulbs to half brightness.... is there a simple and inexpensive solution to this? The bulb is the 1141 size base.
|
|
|
04-13-2011, 02:17 PM
|
#2
|
Senior Member
Join Date: Dec 2010
Posts: 517
|
Do a search for a 12v dimmable switch in google . Lots of options.
__________________
2009 Dodge Ram Mega Cab 2500 6.7 cummins
2011 Forest River Cherokee 28BHKS
|
|
|
04-13-2011, 03:08 PM
|
#3
|
Junior Member
Join Date: Mar 2011
Posts: 17
|
Yes, did that before I posted the original question.
I don't find $30+ inexpensive for the ability to dim a bulb.
|
|
|
04-13-2011, 03:13 PM
|
#4
|
Senior Member
Join Date: Aug 2010
Posts: 771
|
i would check Radio Shack they should be able to guide you in the right direction. Can't you just put a variable resistor in line like a dimmer knob in your house? they are cheap!
|
|
|
04-13-2011, 03:15 PM
|
#5
|
Senior Member
Join Date: Dec 2010
Posts: 517
|
__________________
2009 Dodge Ram Mega Cab 2500 6.7 cummins
2011 Forest River Cherokee 28BHKS
|
|
|
04-13-2011, 03:18 PM
|
#6
|
Senior Member
Join Date: Aug 2010
Posts: 771
|
Quote:
Originally Posted by scubieman
|
that is what I was talking about, something along those lines.
|
|
|
04-13-2011, 03:25 PM
|
#7
|
Junior Member
Join Date: Mar 2011
Posts: 17
|
My previous searches turned up that box on ebay for around $3-4. Certainly an option, but a little bulky and exposed wires.
I'm looking to dim a living room light that we like to have on when watching tv. It's just too bright and distracting. I didn't know if lower wattage bulbs were available, or if adding a resistor (value??) would work. I'm looking for about half the light output.
|
|
|
04-13-2011, 08:31 PM
|
#8
|
Senior Member
Join Date: Apr 2009
Location: Carmel, Indiana
Posts: 309
|
A 1141 bulb appears to be a 18.5 watt bulb. You could put a resistor in series to cut the light out put but it would have to be at least a 10 ohm 10 watt resistor and you will need one for each bulb you want to dim. And you won't be able to dim them. If you want the light output decreased without the ability to dim I would call a place like Easternlightbulbs.com (I have nothing to do with them). They should be able to tell you what bulb you could use to replace your current ones.
__________________
kz08h5
2008 Chevy Silverado 2500 Duramax Crewcab
Jeep Commander - sold
Flagstaff V-Lite WRB26
|
|
|
04-13-2011, 10:56 PM
|
#9
|
Junior Member
Join Date: Mar 2011
Posts: 17
|
Thanks kz08h5!
That's what I was looking for.
Actually, what I found out today is that a 5 ohm to 6 ohm, 10watt should approximately reduce the brightness by 1/2.
I'm going to assemble a small rotary switch and use three taps; full, 1/2, and 3/4 brightness. I think I found one that will mount right in the fixture.
I'm planning on using this on two light fixtures; one in the tv area, and one over the headboard of the bed. My fixtures are the typical 2 bulb/two position switch, so the second position on the fixture will always be full glitter.
I've happily replaced the first position bulbs with the 32 led boards in all the other fixtures in my rig, and very pleased with the results! I found that info in this thread: http://www.forestriverforums.com/for...ults-9233.html
Thanks for the link to Eastern light bulbs. Eventually I'm going to get up to speed on LED's and make my 1/2 & 3/4 brightness bulbs using them.
Thanks again to all for your replies. This is a great forum.
|
|
|
04-14-2011, 12:00 AM
|
#10
|
Moderator Emeritus
Join Date: Nov 2008
Location: Winston-Salem, NC
Posts: 2,381
|
You can't reduce the brightness on LED bulbs by using a resistor. Also, those 10 watt resistors you have found will put out a lot of heat, so make sure you allow for that if you put them in the existing fixtures. Also at 5 ohms, you will only be putting about 4 volts to the bulb, probably won't even come on. I would look at a 2 ohm resistor, or make a reflector, or switch it for an led bulb with less lumen s.
__________________
LadyWindrider
2012 Ford F250 ext. Cab 4x4
2002 Jeep Wrangler Sahara
2008 Yamaha V-Star 650 Classic
2008 Work and Play 18LT
|
|
|
04-14-2011, 12:56 AM
|
#11
|
Junior Member
Join Date: Mar 2011
Posts: 17
|
This post is in reference to an 1141 bulb.
At 5 ohms I'm measuring 6.8volts.....approximately 1/2 the voltage, and approximately 1/2 the brightness. I'll use a 7 or 8 ohm resistor for the 3/4 brightness position.
Heat is a concern. After several minutes under power, I have no difficulty holding the resistor in my hand, the bulb is noticeably hotter.
I'll double check the entire assembly at length for heat before I enclose it in the fixture.
Didn't mean to give the impression that this will work with an LED. Eventually I'll find a small array of LED's that will give me the half brightness I'm looking for. When I learn more about LED's, I'll probably build my own boards, which will also greatly reduce the energy draw, as opposed to the incandescent bulb/resistor.
|
|
|
04-14-2011, 02:15 AM
|
#12
|
Senior Member
Join Date: Jul 2009
Location: Louisiana
Posts: 156
|
What about painting the inside of the lens white? I am thinking of doing this to the light over the head of my bed.
__________________
2010 Cherokee Grey Wolf 28BH
86ish palomino slide in
2000 F250 superduty 4x4 7.3/6speed crew/ short
|
|
|
04-14-2011, 11:12 AM
|
#13
|
Anacortesians
Join Date: Oct 2010
Location: Anacortes, WA
Posts: 1,166
|
The "dimmer knob in your house" is actually a thyristor which only works on AC. It wouldn't work on 12VDC.
__________________
Frank and Eileen
No longer RVers or FR owners
|
|
|
04-14-2011, 11:57 AM
|
#14
|
Senior Member
Join Date: Jun 2010
Location: SUNSHINE STATE
Posts: 1,769
|
Hot resistor !!!!!!
Windrider is 100% correct about the resistor getting hot. Better make sure the resistor is not touching anything that is combustible . Why not just use a lower wattage bulb?
__________________
Sid & HRH MISSY, SHIH TZU
2019 WILDCAT 28 SGX
2014 F-250 KING RANCH PS 6.7L/SWD/6R140/BFT
TST Truck System Technologies TM-507SE
DAYS CAMPED 2023 69 DAYS
[SIGPIC][/SI[SIGPIC]
|
|
|
04-14-2011, 04:37 PM
|
#15
|
Junior Member
Join Date: Mar 2011
Posts: 17
|
Well, the answer to my situation was found at Walmart....
"ritelite" wireless led puck. 2 brightness settings, auto-on for use in cabinets or closets, and selectable direction of light.
Who'd thunk????
$6.97
Don't particularly care for battery operated (3 AAA), but this just might do what I need in both tv and bedroom locations.
|
|
|
04-14-2011, 05:48 PM
|
#16
|
Member
Join Date: Jan 2011
Location: southern Ontario
Posts: 40
|
Quote:
Originally Posted by Shasta1
Is there a resistor that can be used to cut 12v in half?
I'm wanting to dim a couple of bulbs to half brightness.... is there a simple and inexpensive solution to this? The bulb is the 1141 size base.
|
use a lo93 bulb instead, it is 9.3 watts, much dimmer
__________________
F150 Crewcab XLT
2011 Flagstaff 831RKSS
OHCNDA
|
|
|
04-15-2011, 11:39 AM
|
#17
|
Junior Member
Join Date: Mar 2011
Posts: 17
|
Thanks ohcnda!
Excellent suggestion. Where do I find these?
I did a search and it seems that this bulb is used in landscaping lighting and pools. I'll check the Home Depot, Lowes, and Ace type stores.
Thanks!
|
|
|
04-15-2011, 07:47 PM
|
#18
|
Senior Member
Join Date: Jan 2011
Location: Medina, Ohio
Posts: 307
|
__________________
John & Nicole
2004 Ford Excursion 6.0L 4x4
2011 Flagstaff 831FKBSS
Nights Camped: '06=122 '07=12 '08=18 '09=10 '10=18 '11=28 '12=16
|
|
|
04-18-2011, 12:22 PM
|
#19
|
Junior Member
Join Date: Mar 2011
Posts: 17
|
That lo 93 bulb is rather elusive.....haven't found one yet.
|
|
|
04-22-2011, 12:31 PM
|
#20
|
Junior Member
Join Date: May 2010
Posts: 13
|
I found some lower wattage bulbs at automotive store, drastically reduced the amount of heat and still has plenty of light, original bulbs deformed the lens when child placed blanket over fixture in bunk. very happy with the lower wattage bulbs.
__________________
2008 Sequoia
2008 Shamrock 25RS
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|