Beat to post by gas peddler
However one bit of "Head's Up" when doing this "a lot."
Watch for bent pins in the socket. Since the blades of the fuse go in crooked, they spread the blades of the socket a bit to hold the fuse.
Long time use could allow the blades in the socket to take a permanent "set."
This could also happen naturally to the plug just from a lot of use. Just keep an eye on it. If you suddenly lose running lights (or they become intermittent) I would check that socket for grip.
One other thing Gaspeddler, your socket could do with a cleaning (mine is due as well) and I use this tool to do it.
Phillips - 6 & 7 Way Plug & Socket Brush
Lou and Laura with Bella - German Short Hair Pointer
2008 GMC Sierra 2500HD Crewcab SB Allison Duramax
2010 Flagstaff 8526RLWS - Superglide 3300
HAM CALLSIGN - KC3FFW