Tank monitor and pump

[MattR77]

Hi.

I picked up a 2012 Stealth FS2410 and on my first trip, I had an issue with the water and tank indicators. Water read empty the whole time water pump got sputtery after 3 days. Any ideas how to fix?

Thanks,
Matt

Also

[Terier]

Were you camping without hook ups? If so, my guess would be that the fresh water tank may not had been completely filled. Sometimes there's air in the tank which can give a false "full" reading.

Please wait for experienced members to chime in.

[MattR77]

It was showing completely empty since the moment I filled it. I stood Jose-in-hand for 15 minutes while it poured in until it came out of the vent hole. When the trip was done and I went to dump, the water flowed out for a good 2 minutes.

I'm as confused as can be. I appreciate the reply though! Thank you very much...

Matt

[MattR77]

Ah GEEZ...autocorrect strikes again. I stood HOSE in hand...lol, oh man that looks bad.

[Dave_Monica]

Sounds like a problem with the sensor wiring either at the level read-out or on the tank itself.

Did you have readings for the gray and black tanks?

Dave

[MattR77]

Gray and black tank seem to be operating normally. I guess I should start with a multimeter on the individual wire level at the tank.

Thanks for the input!
Matt