Hello. Does anyone know what the flooring construction is on rockwood roo 2009 models? What the layers are? The bathtub drain flanged leaked by allowing a bit of water leak by under the tub to a cutout section beneath the tub. I'm concerned if I will need to replace/repair the flooring to prevent rotting. Thanks for the help
Just to provide more details. I noticed the leak under the trailer leaking by through one of the freshwater plumbing drain valve protrusions below the camper. I thought it was the valve itself but found water around the caulked seal around the lines protruding below the deck. Further inspection revealed the leak coming from the shower drain flange. I sealed the flange ofcourse and dried out beneath the tub with a space heater and ran the space heater throughout the camper. I'm just concerned because the water made it all the way from driver side where shower is to the passenger side. I'm considering drilling holes beneath camper in area where suspected water may have spread, Injecting resin, and pluging it with dowels in order to reinforce exhisting material. I am just not sure what the bottom layer is beneath the black water/moisture barrier under the camper. Wood? Aluminum sheeting? Etc?
Thanks for the reply. That is what I was hoping not to do. Did you replace both layers? If I am to do this, I intend to do it right and replace the whole section of flooring from port to starboard. Are there any recommendations, lessons learned, or tips prior to tackling this project?