dummy stickers

[TimNJTA]

I recently did this and tried goof off first. It wasnt doing the trick so i switched to gasoline and it worked much better on the 5 year old stickers. Then used windex for piece of mind.

I dont need stickers to tell me the difference between the cable input and the fresh water fill.

[Ford Idaho]

I leave the stickers in place for the next owner.

[notaz3]

Ours have all come off before leaving the lot. I don't need "here's your sign" all over a trailer. Told dealer that all warning stickers and dealer markings had to come off or he could pay me to advertise.

[Solo Hunter]

Thanks Tim Everything goes tomorrow.

[B and B]

I left one dealer sticker on that turned to chalk and cracked plastic, not UV proof. Gone as well some stickers about tires.I removed the stickers inside and put them inside a cupboard door.

WD 40 works as a solvent to clean goo off as well. I use window cleaner to clean wd 40 then soap and water to clean window cleaner

[TimNJTA]

Well lemme add to be clear ...

1) heat gun to remove sticker first

2) little bit of gas on a paper towel to remove any leftover adhesive

3) windex next

4) important stickers like gvw and tire info i left on the trailer

[aceinspp]

Yep first thing when I get a new trailer is to remove all the stickers.

[youroo]

Notice Do (NOT) use GASOLINE as a cleaning agent! Youroo!!

[fonzie]

Originally Posted by youroo

Notice Do (NOT) use GASOLINE as a cleaning agent! Youroo!!

X2

GOO Gone works great....

Stain Removal | Adhesive Remover | Oven Cleaner

[PhoneDude 8289]

Removed 36 stickers with
1. Hair drier to remove all the sticker

2. A rag dampened with acetone removed glue in a snap

3. soap, water and a little rinse

4. A good past wax

Our RV is sticker free

[TimNJTA]

Originally Posted by youroo

Notice Do (NOT) use GASOLINE as a cleaning agent! Youroo!!

Why not? Not being smart ass, just for knowledge

[Sportracker]

My thought would be that gas has a higher volitility than many other petroleum distilates. It basically evaporates faster allowing the concentration in the area to increase to a cumbustable level, so could be explosive. Mineral spirits would have similar cleaning properties with less volitility, but still avoid areas with open flames such as pilot lights. Lots of ventilation with all petroleum based products would be good

[OzarkPreacher]

Originally Posted by 4mula1fan

The FIRST thing I did when we got it home, is peel off all of those blame stickers. Dealer stickers went too. If somebody's name is going on our camper, it's gonna be OURS...

Same here, unless the dealer wants to pay for advertising it aint staying on ours.

[whj77372]

Some may think that it is sad but the RV makers feel that they must put those stickers on so that they lessen the risk of bring brought to court. I remember that when I bought my last cattle trailer I had to sign a form that stated that I understood that metal cattle trailers will rust! Reminds me of the coffee that the woman put between her legs and got burned. She was awarded damages. In the end she didn't get much because the award was reduced by a higher court.

[F.R.O.G.]

Technically, there's probably no sticker on the mower advising against this...



but this is much cooler!

[aceinspp]

Stupidity by folks is what brings on the rash of stickers and all the odd ball safety features. Now days some folks just need to be told every little thing. I really do not know how I have lived so long with no warnings back in my day. Later RJD

[trbomax]

I completely understand the need and reason for them being put on by the factory,and for first timers and even some old timers they can be a needed thing. Myself,I just think that between the warning stickers,dealer stickers and a lot of the over the top graphic packages they come with, they make it look like a circus wagon.If I could order a unit with no graphics what so ever,I would.

[aceinspp]

Have you ever tried to order one without the graphics? I would think it could b done. Later RJD

[WolfWhistle]

There are a lot of stickers, huh? Well I took them off and stuck them to paper (when they came off intact) and put in a book for next owner... the one's I thought might be important. The others I tossed. But, then I also made and placed some small labels back on using the P-Touch for some important things, in case I forget.

[Solo Hunter]

There were a lot of stickers. Thank for the heads up of saving them on a piece of paper. It seemed the factory could have made a nice sticker for the unmarked switches. I suppose the were thinking aw just let them guess. Thanks for the reply and the advice.