Emergency fix in Maine

[Cowboy6201]

When I was getting my 296 put down and leaving for Maine the next day, I discovered the wire the switch cutting power to the interior lights fell off.
I had no time to fix it.
So I had no choice but to fix it in Maine before I put the roof up.
All is good now, just gotta get a new screw they're brass and it stripped while trying to get it out.

[Bama Rambler]

Thanks for posting this. The picture helps a lot. I'm sure it'll help someone to see what that switch looks like.

[Cowboy6201]

Originally Posted by Bama Rambler

Thanks for posting this. The picture helps a lot. I'm sure it'll help someone to see what that switch looks like.

No problem, it easier if the roof is only raised up just enough to get in there, and better if you access it from the front and not the side.
Yo take it out it's 2 screws that hold the switch in, and 2 more attaching the connectors on that the wires are crimp in to. It's that easy.
But watch the screws to the wire connectors they're brass and strip easy, they're combo Philips and straight screw driver, u can either one.
The switch is marked on either side + & - note which wire goes where.