Eternabond Tape on a New camper

[Crusadernoob]

Besides the cleaner I thought that you also needed an adhesive promoter that sprayed on before? Any thoughts, I'm also considering adding eterna bond to all seam's after maxxair fan's are installed.

[f5moab]

Isn't the primer only needed for below 32 degree installation?

[wolfe4656]

That is what I thought. Here is what I found.
Eternaprime
Prepares surface for cold weather applications, or if oxidation is present.

[M&K Hoffman]

Originally Posted by wolfe4656

I got some of this hope it is as good as the acetone.

Eternabond EC-1 Etranaclean Spray Cleaner -14oz by Eternabond
http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1

I have the MSDS sheet on EternaClean and it is primarily acetone.

[vinmaker]

I finished taping the roof today. It went pretty well. I will post photos tomorrow.

[vinmaker]

Here are a few pics. Sorry about the sepia color. I did not realize the camera was set to that and will take full color pics once the sun comes out.

The black tank vent was very hard to do. The tape also bleeds glue on the edges and once that happens you tend to smudge it when your pressing the tape down. Luckily that will be high on the roof and cannot be seen.

Vin.