Sink Hardware

[Sand D]

In our 2014 29schw the water spout needs to be removed every time when we fold up our trailer. Has anyone replaced the entire sink hardware with a lower spout and faucets that would not need to be removed. I have found so much water leaking from the tube when the spout is removed. I use a wine cork to seal it and that work fine but would love a solution so that the spout could stay in place.

[Wygantmb]

I'm not sure about on the 29hw. We have the 31hw. I was going to try and change it out but the faucet actually sits under the rear bed when closed up. So I'm basically stuck with it as it is.

[Trevor43]

Originally Posted by Sand D

In our 2014 29schw the water spout needs to be removed every time when we fold up our trailer. Has anyone replaced the entire sink hardware with a lower spout and faucets that would not need to be removed. I have found so much water leaking from the tube when the spout is removed. I use a wine cork to seal it and that work fine but would love a solution so that the spout could stay in place.

One option would be to drain your hot water tank before packing up and this will drain a large portion of the lines. I do this because it's less weight to carry and it allows your anode rod to last much much longer.