2013 Sabre 34tbok Front Bedroom slide issue
I'm having issues with my front bedroom slide. The white molding on top of the slide is just catching slightly on the rubber, keep the top of the slide from coming in with the rest of the slide. It eventually pops out and comes in but this is putting a lot of strain on the floor screws. Enough that it popped some out. Had to add reinforcements.
Looking to see if there is any adjustments to bring the slide down like 1/4 inch would probably do the trick even less maybe.
I looked at the motor setup and brackets and there doesn't seem to be any thing that can be adjusted.
I removed the guide rollers from the bottom to see if this was forcing the slide up a bit, but it didn't change anything.
Any ideas? Here are a few pictures to help out.