6 Point auto level

[mach8274]

Having issues with our auto level system on our Columbus. After disconnecting from the truck, I hit the auto level button and it starts to do its thing. After it grounds the rear levelers, it seems to want to keep extending the LR jack until it's out of stroke. It will do this in our level driveway or in a campsite, doesn't matter. It will never get to the point of lowering the pair of stabilizers in the middle and complete the process. Has anyone else seen this?

[Rmk2001800]

Try removing the positive terminal on the battery to reset the system.

[TURBS]

There a reset procedure in the owners manual.
did you try that yet?

[mach8274]

I am going to try the reset procedure next week and see if that helps. If not, it's going to the dealer for a few small items in about a month anyways, so I'll have them look at it then. Thanks for the responses.

[mach8274]

Performed the zero point calibration on the auto level system today...works like a gem!!

[Swift 2]

I found that after disconnecting the trailer from the truck and moving the truck away, that I need to level the trailer by lowering the front of the trailer down. A small level on the side of the trailer helps. If it isn't lowered the rear jacks run out of travel and the tires will be lifted off the ground. Get the trailer close to level before hitting the auto level button.