Can someone give me a distance from back of wheel to pin or cap please.
Prepping site for ordered trailer and need to know when I can start sloping fill away from close to level on site. If I can get this distance, I know what I need for prep!
I take it that yours is not available to measure. I have the 33ckts which I think is close but its in inside storage and not available. Is there a dealer nearby where you can measure one?
Thanks Buckeye... yup it is on order but need to prep site prior. I have 'guessed' but hoping one of the owners here might have a chance to get me a real number!
If you're going to guess, I would error on the long side. I have the same situation as you. My lot slopes off about halfway down the side of the house. Good luck. I hope you get a reply that is of some help. You may want to post on the RV.NET fourm also.
I'll measure this today. I just have to move my bikes and get into my storage area. Maybe at lunch when I go for a bike ride.
__________________
Officially a SOB with a 2022 Jayco Precept 36C
Checkout my site for RVing tips, tricks, and info | Was a Fulltime Family for 5 years, now we're part-timing on long trips
Measured from just behind where the back wheel curves up off of the ground - it's a little over 27' to the pin.
Now, 2 caveats- I was measuring with a 12' tape measure in 10' chunks (but I did it twice and got consistent measurements). And, I have a very early 2013 which they changed the front cap for the current design. I doubt they moved the wheels or pin, just be aware.
__________________
Officially a SOB with a 2022 Jayco Precept 36C
Checkout my site for RVing tips, tricks, and info | Was a Fulltime Family for 5 years, now we're part-timing on long trips