Palomino roof panel warpage
Ive got a 2010 31 REDS that has a few roof panels warped up pushing on the membrane along the sides in between the roof trusses. The roof is in good condition and I have no leaks. The roof panels seem to be secured well to the trusses but doesn't appear to be fastened along the sides. Does anyone no if the panels are fastened all the way around and if there is any thing along the edges to fasten to. Has anyone else seen this problem. The only thing I found that could have cause this is the skylight in the shower was not secured very well to prevent water vapor from entering the ceiling from underneath. Thanks in advance for any advice.
|