removing U shape dining area

[Firedude26]

So i have decided i dont like the U shaped dining area, im gonna replace it with 2 recliners and a end table in the middle and remount the plug that is there.

so my question is anyone else done this? looking to see what others have done.

i bought this off the lot so thats why im removing, if i was to order i would of ordered like that.

if anyone is interested in the removal stuff let me know

[Rmk2001800]

I removed mine in the last camper- about 30 screws and 10 pcs and the recliners were getting installed. Great mod!

[JJaxon]

Pics of the dinette, size measurement, and location my help get them out of your garage.

[Firedude26]

Originally Posted by JJaxon

Pics of the dinette, size measurement, and location my help get them out of your garage.

ill measure tomm, but first off in in SE MI

[PhilG]

I removed the dinette from my SS2300 recently, not the U-Shaped one. If you type Remove/Exchange Dinette in the Search Bar, you will see plenty of threads on the topic...

Phil

[rockfordroo]

Someone just posted about doing this a few days ago. Go up to the search field and do a search.

[Firedude26]

Originally Posted by rockfordroo

Someone just posted about doing this a few days ago. Go up to the search field and do a search.

i did , it didnt show anything, sorry, sometimes the search dont always show everything, maybe i typed wrong thing in box,

[rockfordroo]

Here's one:

http://www.forestriverforums.com/for...cs-121842.html

Try this search:

https://www.google.com/search?q=remo...iverforums.com

[rhutzler]

We have a 270s where we removed the U shaped dinning table and benches. We installed side-by-side theater recliners, that my Wife found on Amazon (on sale)! This also has a central console where I installed a power outlet that also includes 2 USB ports. So running our laptops and charging our phone will be convenient.
Some things we checked before doing this work.
Important - I strongly recommend - disconnect the shore power and set the battery disconnect. If you need power, run an extension from a separate power source. Lot easier doing that then replacing fuses and/or the ATS
1.) Measure the space for width, length and depth
2.) Find a seating unit that you like and will fit in the dinette space.
3.) Since our dinette area is on the slide out, we go a weight measurement of what the dinette components (ours included a large table that had a center metal post pivot.
Compare that weight to the weight of the new seating unit. You don't want to add a lot of weight that may impact the slide operation.
4.) Before and during the dinette disassembly, take pictures. Even though we were not keeping the dining area components - pictures of how the wiring was laid out and attached help in the 'pre-install' of the new seating area.
5.) Take your time. Removing wood that is stabled with large connectors can snag clothing and skin.
To make sure I did not damage the walls/floor, I reused the same length screws - or if new ones were needed, matched the length. This prevented any accidents (holes through the exterior walls, etc.)
The above work took about 12 hours, working over 3 days, but this arrangement is more comfortable for us.
I've included a picture of the new seating area.
Best wishes -

[rockfordroo]

I would also suggest: Measure your door and make sure any new seating you buy can fit through it!!!

[morganrc1955]

We replaced the u shaped dinette in our 25FKS Micro Lite with a triple recliner couch about 2 months after we bought it new. Best decision ever. Bought the couch from recpro.com. All of their furniture breaks down into pieces small enough to go through a standard RV door.

[Raab]

We did exactly what you're referring to, except we also removed the couch from the slide. Moved the table to the corner where the couch was and bought 2 stools to sit on. We then put the recliners where the dinette was. My cousin built a 3 sided table to cover the outside access hatch and mounted it to the outside wall. Hubby put the outlet in the table and we are thrilled with the results.

[Tigger1]

OP - not sure of your slide measurements, etc but we did this earlier in the year

http://www.forestriverforums.com/for...cs-153804.html

[Firedude26]

Originally Posted by rhutzler

We have a 270s where we removed the U shaped dinning table and benches. We installed side-by-side theater recliners, that my Wife found on Amazon (on sale)! This also has a central console where I installed a power outlet that also includes 2 USB ports. So running our laptops and charging our phone will be convenient.
Some things we checked before doing this work.
Important - I strongly recommend - disconnect the shore power and set the battery disconnect. If you need power, run an extension from a separate power source. Lot easier doing that then replacing fuses and/or the ATS
1.) Measure the space for width, length and depth
2.) Find a seating unit that you like and will fit in the dinette space.
3.) Since our dinette area is on the slide out, we go a weight measurement of what the dinette components (ours included a large table that had a center metal post pivot.
Compare that weight to the weight of the new seating unit. You don't want to add a lot of weight that may impact the slide operation.
4.) Before and during the dinette disassembly, take pictures. Even though we were not keeping the dining area components - pictures of how the wiring was laid out and attached help in the 'pre-install' of the new seating area.
5.) Take your time. Removing wood that is stabled with large connectors can snag clothing and skin.
To make sure I did not damage the walls/floor, I reused the same length screws - or if new ones were needed, matched the length. This prevented any accidents (holes through the exterior walls, etc.)
The above work took about 12 hours, working over 3 days, but this arrangement is more comfortable for us.
I've included a picture of the new seating area.
Best wishes -

thats exactly what im gonna be adding, i have 100" so i can do a set up like that plus put end tables atg ea end, looks great!!!!

[Firedude26]

Originally Posted by rockfordroo

I would also suggest: Measure your door and make sure any new seating you buy can fit through it!!!

i hAve a toyhauler with the patio doors inside so i have plenty of room, good point though

[Firedude26]

ok i found a power love seat thats gonna fit real nice, even have room on each side for a small end table, i cant wait to do this, gonna be a few weeks though. Art Van had this for $600 today. i think its a steal.

[Firedude26]

Well Removed the U shape seating today, all came out perfect. now for the install of the sofa.

[Firedude26]

Finished ! love it, cant wait to use it now, lol stained and varnished the end tables i made today also.
not sure why one pic is sideways, sorry

[DGLardon]

Did you buy your power loveseat at a RV furniture dealer or just a regular loveseat?

[Firedude26]

Originally Posted by DGLardon

Did you buy your power loveseat at a RV furniture dealer or just a regular loveseat?

bought it from Local Art Van store here in MI.